Supermicro Pentium® D Board PDSMI-LN4 Motherboard PDSMI-LN4 Benutzerhandbuch
Produktcode
PDSMI-LN4
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of
the
PDSMi-LN4 motherboard. The PDSMi-LN4 supports single Intel
Pentium D (Dual-Core)/Pentium 4 Extreme Edition/Pentium 4/Pentium Extreme
Edition/Celeron D LGA (Land Grid Array) 775 Processors at system bus speeds
of 1066 MHz/800 MHz/533 MHz. The LGA 775 Pentium D/Pentium 4/Celeron D
Processor is housed in a Flip-Chip Land Grid Array (FC-LGA4) package that inter-
faces with the motherboard via an LGA775 socket. The PDSMi-LN4 supports the
Intel Hyper-Threading (HT) Technology, the EM64T Technology, the Enhanced Intel
SpeedStep Technology (EIST) and the Matrix Storage Technology. Please refer
to the motherboard specifi cations pages on our web site (http://www.supermicro.
com/Product) for updates or visit Intel's web site for processor support. This product
is intended to be professionally installed.
Manual Organization
Chapter 1 describes the features, specifi cations and performance of the PDSMi-
LN4 mainboard and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when
installing the processor, memory modules and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for the video, the memory and the system setup.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A provides BIOS POST Messages.
Appendix B lists BIOS POST Codes.
Appendix C lists Software Installation Instructions.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
to prevent damage done to the components or injury to yourself:
(*Note): Note: Additional Information given to differentiate various models or
to ensure correct system setup.
Preface
iii
Warning:
Important information given to ensure proper system installa-
tion or to prevent damage to the components.
Danger/Caution:
Instructions to be strictly followed to prevent
catastrophic system failure or to avoid bodily injury.