Cisco 16GB SD UCSC-SD-16G-C220= Benutzerhandbuch

Produktcode

UCSC-SD-16G-C220=

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

SUPPLEMENTAL MATERIAL

Thermal Grease (with syringe applicator) for CPU to Heatsink Seal

Thermal grease must be applied to the top of the CPU where it comes in contact with the heat sink.
Instructions for applying thermal grease are found at:

http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/replace.html#wp1233864

Air Baffle Replacement Kit

Air baffles are designed to direct airflow through the server to maintain server temperature at a safe
operating level. These baffles must always remain installed during server operation. The Air Baffle
Replacement Kit includes the air baffles needed for one UCS C220 M3 server.

CPU Heat Sink Cleaning Kit

The cleaning kit is used to remove the existing thermal compound from the bottom of the heat sink during
a CPU replacement process. Instructions for cleaning are found at the following link:

http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/replace.html#wp1233864

CAUTION: Use only the thermal grease specified for this server
(UCS-CPU-GREASE2=). Thermal grease for other systems may have
different thermal conductivity properties and may cause overheating if
used in the C220 M3 server. DO NOT use thermal grease available for
purchase at any commercial electronics store. If these instructions are
not followed, the CPU may overheat and be destroyed.

NOTE: When you purchase a spare CPU, the thermal grease with syringe applicator
is included.

NOTE: When you purchase a spare CPU, the CPU cleaning kit is included.