Wi-Ex zBoost CI YX645 Merkblatt
Produktcode
YX645
zBoost
®
CI YX645
Designed For Professional Installers
© Wi-Ex. All rights reserved. V9/13/2011
.
.
By
A revolutionary cell phone signal booster for demanding professional coverage applications, the zBoost designed YX645, for
custom installers, is a Bi-Directional Amplifier (BDA) System which captures and amplifies the cell signal to extend a Cell Zone™
up to 10,000 square feet. The YX645 is designed for the professional installer and is available for the 800 MHz Cellular, the
1900 MHz PCS band or Dual Band (both 800 MHz and 1900 MHz bands).
custom installers, is a Bi-Directional Amplifier (BDA) System which captures and amplifies the cell signal to extend a Cell Zone™
up to 10,000 square feet. The YX645 is designed for the professional installer and is available for the 800 MHz Cellular, the
1900 MHz PCS band or Dual Band (both 800 MHz and 1900 MHz bands).
Benefits include:
•
zBoost YX645-PCS-CEL(shown) model improves all 6 PCS
sub-bands and both Cellular sub-bands
sub-bands and both Cellular sub-bands
•
Increases indoor cell signal coverage – up to 10,000 sq feet
•
Decreases dropped or missed calls
•
Extends phone battery life (uses less power when signal is stronger)
•
Works with phones and carriers using 800 and 1900 MHz (not Nextel)
•
Maintains network integrity using patented technologies
The zBoost CI YX645 includes the amplifier base unit, power supply, high gain signal and base unit antennas, signal combiner
and mounting hardware. Additional professional accessories are available.
and mounting hardware. Additional professional accessories are available.
PRODUCT SPECIFICATIONS
PCS Frequency
Frequency
1850-1990 MHz
PCS Bands
ALL: A,D,B,E,F & C
Network Format
CDMA, GSM, TDMA, AMPS, GPRS, EDGE, EV-DO, HSPA, 3G
System Gain
75 dB
Composite Output Power Limit - EiRP
30 dBm
Antenna Signal
13 dBi Panel; F-type female
Antenna – Base Unit
9 dBi Patch; TNC male
Cable Loss
3000 MHz RG-6, approximately 1 dB/10 ft.
CEL Frequency
Frequency
824-894 MHz
PCS Bands
ALL: A, B, A’ and B’
Network Format
CDMA, GSM, TDMA, AMPS, GPRS, EDGE, EV-DO, HSPA, 3G
System Gain
70 Db
Composite Output Power Limit - EiRP
30 dBm
Antenna Signal
8 dBi Panel; F-type female
Antenna – Base Unit
6 dBi Panel; TNC male
Cable Loss
3000 MHz RG-6, approximately 0.6 dB/10 ft.
Both PCS and CEL Frequencies
Base Unit RF connectors
F-type female and TNC female
Wall Supply Input
100-120 VAC 60Hz, 240 VAC also available
Power Consumption
2W standby, 5.5W max signal
System Certifications
UL, FCC Parts 15 & 24 (PCS), FCC Parts 15 & 22 (CEL), Industry Canada
Base Unit size and weight
5” x 7” x 1.375” - 12 oz.
Base Unit and Power Supply
Indoors Use Only, 5
O
to 40
O
C (40 to 105
O
F)
Coverage (open areas)
4-5 signal bars at roof antenna; 120’ radius at 90
O
width;
3-4 bars inside; over 10,000 sq. ft
Handles all PCS or CEL protocols and includes multiple patent pending technologies to provide low-cost coverage while continually adapting
to signals to prevent interference and remain transparent to the wireless network. Provides an indicator if the antennas are positioned
improperly, but will NOT suffer damage or interfere with the Carrier Network.
to signals to prevent interference and remain transparent to the wireless network. Provides an indicator if the antennas are positioned
improperly, but will NOT suffer damage or interfere with the Carrier Network.