iHome IP40 IP40WV Benutzerhandbuch

Produktcode
IP40WV
Seite von 14
Trouble Shooting
9
P13
Symptom 
Possible Problem                                                     Solution
Unit does not 
respond (no power)
AC adaptor isn’t plugged to a wall outlet or the 
connector is not plugged into the power supply 
jack on the back of the unit
Plug the AC adaptor into a wall outlet and plug the connector 
into the supply jack on the unit
Wall outlet is not functioning
Plug another device into the same outlet to confirm the outlet is 
working. If outlet is controlled by a switch, try moving switch.
iPhone/iPod does not 
dock properly
Using no or wrong iPhone/iPod insert
Make sure the dock insert is the proper fit to your iPhone/iPod
iPhone/iPod isn’t docked properly
Remove your iPhone/iPod from the dock and check for 
obstruction on the connectors in the dock and on your 
iPhone/iPod. Then reseat it in the dock.
iPhone/iPod isn’t docked properly
Remove your iPhone/iPod from the dock and check for 
obstruction on the connectors in the dock and on your 
iPhone/iPod. Then reseat it in the dock.
iPhone/iPod does 
not respond to the 
unit 
Your iPhone/iPod software is too old
Upgrade software on your iPhone/iPod via iTunes.
iPhone/iPod is locked up
Please make sure your iPhone/iPod is working properly before dock 
into the unit. Please refer to your iPhone/iPod manual for detail.
iP40 cannot control those iPods or other devices.
Using 1st or 2nd generation iPod, iPod 
shuffle or other devices.
iPhone/iPod is not docked properly
Remove your iPhone/iPod from the dock and check for 
obstruction on the connectors in the dock and on your 
iPhone/iPod. Then reseat it in the dock.
iPhone/iPod didn’t 
charge up
iPhone/iPod is locked up/frozen
iPhone/iPod battery has problem
Please make sure your iPhone/iPod is working properly before 
dock into the unit. Please refer to your iPhone/iPod manual for 
detail.
Volume level is set too high
Decrease the volume. Turn off EXB effect
Sound source is distorted
If original sound source file is poor quality, distortion and noise 
are easily noticed with high-power speakers. Try a different audio 
source such as a music CD through the aux jack.
If you are using an iPod Shuffle or external sound source like 
older generation iPod, try reducing the output volume on the 
device itself. Also, try turning the iPod bass boost OFF.
Sound is distorted