Transition Networks SSDTF1012-105 Benutzerhandbuch

Installation  . . . . . . . . . . . . . . . . . . . . .3
Operation  . . . . . . . . . . . . . . . . . . . . . .9
Cable Specifications  . . . . . . . . . . . . .10
Technical Specifications  . . . . . . . . . .12
Troubleshooting . . . . . . . . . . . . . . . .13
Compliance Information  . . . . . . . . .16

* Typical maximum cable distance.  (Actual

Note: The SSDTF10xx-10x requires a CSU
between the device and the Public Telephone
Network.

RJ-45
1.5 km (5,000 feet) *

ST, 1300 nm multimode
5 km (3.1 miles)*

RJ-45
1.5 km (5,000 feet) *

ST, 850 nm multimode
2 km (1.2 miles)*

RJ-45
1.5 km (5,000 feet) *

ST, 1310 nm single mode
8 km (4.8 miles)*

RJ-45
1.5 km (5,000 feet) *

SC, 850 nm multimode
2 km (1.2 miles)*

RJ-45
1.5 km (5,000 feet) *

SC, 1310 nm single mode
20 km (12.4 miles)*

RJ-45
1.5 km (5,000 feet) *

SC, 1310 nm single mode
40 km (24.8 miles)*

RJ-45
1.5 km (5,000 feet) *

SC, 1310 nm single mode
60 km (37.3 miles)*

RJ-45
1.5 km (5,000 feet) *

SC, 1550 nm single mode
80 km (49.7 miles)*

RJ-45
1.5 km (5,000 feet) *

MT-RJ, 1300 nm multimode
2 km (1.2 miles)*

RJ-45
1.5 km (5,000 feet) *

ST, 1310 nm single mode
15 km (9.3 miles)*

RJ-45
1.5 km (5,000 feet) *

MT-RJ, 1310 nm single mode
20 km (12.4 miles)*

Transition Networks SSDTF10xx-10x series
Devices encode and decode T1 or E1 twisted-pair
copper signals over fiber optic cable to extend the
distance and transmission reliability of high-speed

T1 or E1 data traffic. The device is framing independent (as ESF vs. D4) and supports all
common line codes (e.g., AMI, B8ZS, HDB3). 

The SSDTF10xx-10x is designed to be installed in pairs. For example, install one
SSDTF1011-105 as the “local ” Device and another SSDTF1011-105 as the “remote ”
Device.