Trendnet Net Spot Wireless Access Point Benutzerhandbuch

Thank you for purchasing TRENDnet's TEW-453APB Hot Spot Wireless 
Access Point.  

This guide will help you set-up your Access Point quickly and easily. Just follow 
the step-by-step instructions below, and enjoy the benefits of accessing the 
Internet without ever being tied down to wires! If you run into problems, please 
refer to the Troubleshooting section. If you need further technical support, 
please visit www.TRENDNET.com or call technical support by phone.

Verify Equipment

Before setting up the Access Point, you should have the following:

1. A computer with Wired (RJ45) or Wireless network card.

2. TCP/IP protocol installed on the Computer.

3. A web browser such as Internet Explorer (5.0 or higher) or Netscape 

Navigator (4.7 or higher).  

4. A Hub or Switch connecting your existing wired network.  

5. An RJ-45 Network Cable for connecting the Access Point to your network 

switch.  

Verify Package Contents

Please make sure you have everything in the box:

1

Power Adapter 

(24V DC, 500mA) 

CD-ROM

Quick Installation Guide

TEW-453APB

1. Prepare for Installation

English QIG

English

Copyright ©2005.  All Rights Reserved. TRENDware International, Inc.