Triarch 31916 Benutzerhandbuch

 ASSEMBLY AND MOUNTING INSTRUCTION 

                                         For 31916 

Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and 

e 

identify all parts prior to building the unit. Each part is identified on the drawingfor reference. 
 
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item 
for any reason. Please repack the unit using the original carton and inserts. 
 
 
STEP 1:Unpack all the parts and   

 

Glass Washer

Gl ass Shade

Fi ni al

Classify them according to the   

illustration shown at the side. 

Place the parts on a scratchfree   

surface;

 

 

 

STEP 2: Make sure the power is   

turned Off at the Ceiling junction 

box where the fixture is to be 

installed.Secure the cross bar to 

the ceiling junction using the   

junction box screws; 

 

STEP 3: Use the wire nuts to   

Connect positive and negative   

wires. Connect the Ground wire   

to the ground port;   

 

STEP 4: Secure the fixture to the 

Ceiling Junction box using two   

Brass; 

 

STEP 5: Install the correct bulbs 

(not provided); 

 

STEP 6: Install the center rod to the fixture; 

 

STEP 7:Install the glass to the glass shade with nut .Secure with bottom cap 

and the finial.