Tripp Lite PDUMV20HVNET Benutzerhandbuch

208/230/240V 20A maximum capacity (agency de-rated to 16A). Switched, Metered and Monitored Power Distribution Unit (PDU) with

built-in web/network interface in 0U vertical rack form factor

Includes C20 power inlet, detachable L6-20P input cordset and 24 controllable outlets (20 x C13 and 4 x C19)

Supports individually controllable output receptacles, current metering, network monitoring and remote control via built-in Web/network

monitoring and control card

Provides the ability to turn on, turn off, recycle or lock out power to each individual PDU receptacle on a programmable or real-time basis

Switchable outlets enable a number of advanced networking abilities, such as remote reboot on-demand of locked IT equipment, custom

power-on/power-off outlet sequencing, automatic load-shedding of optional loads during power failures and disabling unused outlets to

prevent the connection of unauthorized equipment loads

Remote interface provides data regarding input power conditions, load level and individual outlet power status via secure network or Web

browser interface

Supports notification and logging of all major power events and user specified alarm thresholds

Optional ENVIROSENSE temperature and humidity probe enables remote monitoring of environmental conditions and the ability to report

conditions from up to two contact-closure sensors

Optional ENVIROSENSE probe also supports the connection of up to three use- supplied contact-closure sensors to selectively notify,

monitor and log reported conditions, such as rack door access

DHCP/Manual configuration support provides the ability to have network settings automatically assigned to the card, or manually assigned

via permanent IP addresses 

10/100 Mbps auto-sensing allows optimal communication compatibility with current 10/100 Base-T networks

Real-time clock support maintains the time of day and date even if the PDU is shut down and unpowered

2-tier level access enables an administrator and a guest to log into the web browser for monitoring and/or management of all intelligent

PDUs and similarly equipped UPS systems

Alert notifications via email or SNMP traps provide immediate event notification

Protocols supported include HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP,

BOOTP, NTP

Front panel ammeter displays whole PDU power consumption in amps

On initial power-up, outlets are automatically energized at 250 millisecond intervals to prevent inrush-related equipment interaction and

mains circuit overloads

Included cord retention brackets keep vital network equipment plugged in and continuously powered

Circuit breaker-free format prevents power interruptions due to tripped breakers while still providing mains panel protection from overloads

and short-circuit fault conditions

64-in. 0U vertical rack installation supported with included rackmount brackets

Tooless mounting supported in button-mount compatible racks

208/230/240V

50/60 Hz

208/230/240V

20 x C13, 4 x C19

Each outlet is individually controllable via remote interface

n/a

20A maximum (Agency de-rated to 16A continuous)

C20 inlet accepts included L6-20P input cable. Alternate C19 input cordsets supported.

10 ft./3m

208V, 230V, 240V