Troy-Bilt TB 2142 Benutzerhandbuch

Activating the PTO engages 

power to the cutting deck or other 

(separately available) attachments. 

Push forward on the  

PTO/Blade Engage handle to 

activate it. Pull the PTO/Blade 

Engage handle back to disengage 

the power to the cutting deck 

or other (separately available) 

attachments.
NOTE: The PTO/Blade Engage handle must be in the disengaged 

(OFF) position when starting the engine.

Located in the center of the tractor’s dash 

panel below the steering wheel, the Parking 

Brake/Cruise Control lever is used to engage 

the parking brake and the cruise control. 

Refer to the Operation section of this manual 

for detailed instructions regarding the 

parking brake.
NOTE: The parking brake must be set if the 

operator leaves the seat with the engine 

running or the engine will automatically shut 

off.
NOTE: Cruise control can NOT be engaged 

at the tractor’s fastest ground speed. If the 

operator should attempt to do so, the tractor 

will automatically decelerate to the fastest 

optimal mowing ground speed.

Never leave a running machine 

unattended. Always disengage PTO, set parking 

brake, stop engine and remove key to prevent 

unintended starting.