Troy-Bilt 2620 Benutzerhandbuch

Snow thrower controls and features are described below and 

illustrated  in Fig. 4-1.

The shift lever is located in the right side of the 

handle panel and is used to determine ground 

speed and direction of travel.

There are six forward (F) speeds. Position one (1) is 

the slowest and position six (6) is the fastest. 

There are two reverse (R) speeds. One (1) is the 

slower and two (2) is the faster.

The choke control is found on the rear of 

the engine and is activated by rotating 

the knob clockwise. Activating the choke 

control closes the choke plate on the 

carburetor and aids in starting the engine.

The ignition key is a safety device. It must 

be fully inserted in order for the engine to 

start. Remove the ignition key when the 

snow thrower is not in use.
Note: Do not turn the ignition key in an 

attempt to start the engine. Doing so may 

cause it to break.