Troy-Bilt 769-04090 Benutzerhandbuch

NEVER move the 
shift lever without first 
releasing the wheel 
drive control. Doing so 
will cause premature 
wear on the drive 
system’s friction wheel.

NOTE: Allow the engine to warm up for a few minutes. 
The engine will not develop full power until it reaches 
operating temperature.

1.  If possible, remove snow immediately after it falls.
2.  Discharge snow downwind whenever possible. 
3.  Slightly overlap each previous path.
4.  Set the skid shoes 1/4” below the shave plate for 

normal usage. Adjust them upward for hard-packed 
snow and downward when using on gravel or crushed 
rock.

1.  Always observe safety rules when performing  

any maintenance.

2.  The warranty on this snow thrower does not cover 

items that have been subjected to operator abuse 
or negligence. To receive full value from warranty, 
operator must maintain the snow thrower as  
instructed here.

3.  Some adjustments will have to be made periodically 

to maintain your unit properly.

4.  Periodically check all fasteners and make sure these 

are tight.