Troy-Bilt Flurry 1400 Benutzerhandbuch

Unplug the snow thrower and remove 

the key to avoid unintended starting before 

servicing the snow thrower. 

1. 

Remove the three screws securing the skid plate to the 

auger housing. See Fig. 7-1.

2. 

Remove the worn skid plate and replace with a factory 

approved skid plate.

3. 

Secure using the three screws removed earlier.

1. 

Unscrew the six screws securing the belt cover to the auger 

housing and remove the belt cover. See Fig. 7-2.

2. 

Pull the idler bracket upward to relieve tension on the belt. 

See Fig. 7-3.

Do not unhook the idler extension 

spring. Doing so may allow the spring to become 

dislodged and lost in the auger housing.

3. 

Pull the belt off Pulley B. 

4. 

Replace in the opposite order.