Troy-Bilt 769-03618 Benutzerhandbuch

NOTE: This Operator’s Manual covers various models of tillers 

and the machine illustrated may vary slightly from your tiller.

For detailed information on all engine controls refer to the 

seperate Engine Operator’s Manual.

Each wheel is equipped with a wheel drive click pin that secures 

the wheel to the wheel shaft. The wheels can be positioned in 

either a WHEEL DRIVE or a FREEWHEEL mode.

The forward clutch bail controls the engagement of the forward 

drive of the wheels and tines.

The Reverse Clutch Control controls the engagement of reverse 

drive to the wheels and tines. 

This lever controls the tilling depth of the tines. Pull the lever 

back and slide it up or down to engage the notched height 

settings.

The handlebar height is adjustable to three different settings. In 

general, adjust the handlebars so they are at waist level when the 

tines are 3-4” in the ground.

Unthread the gas cap to add gasoline to the fuel tank.

Engine oil level can be checked and oil added through the oil fill.