Turbosound LMS-A6 Benutzerhandbuch
user manual
LMS-A6
LMS-A6 user manual
Page 6
FRONT PANEL FUNCTIONS
1. Mono Band 1
Mono Band 1
Mono Band 1
Mono Band 1 – sums the Left and Right Band signals together (up position) and feeds them in
mono to both Band 1 outputs.
mono to both Band 1 outputs.
2. Limiter cancel
Limiter cancel
Limiter cancel
Limiter cancel – disables all limiter functions and causes the LIMITER CANCEL LED to light.
3. Power Standby switch
Power Standby switch
Power Standby switch
Power Standby switch – determines the power-up mode: in the up (cancel) position the unit
automatically switches out of mute after six seconds; in the down position the unit remains in
standby mode with all outputs muted.
automatically switches out of mute after six seconds; in the down position the unit remains in
standby mode with all outputs muted.
4. Remote Standby cancel
Remote Standby cancel
Remote Standby cancel
Remote Standby cancel – enables (down position) or disables (up position) the REMOTE
STANDBY function. Inoperable if the remote stanby function has not been wired up.
STANDBY function. Inoperable if the remote stanby function has not been wired up.
5. Phase adjustment
Phase adjustment
Phase adjustment
Phase adjustment – variable adjustment between 0
° and 180°.
6. Gain trim
Gain trim
Gain trim
Gain trim – allows the band 1 gains and band 3 gains to be adjusted to match band 2 where
speaker/amplifier sensititvities vary for each band.
speaker/amplifier sensititvities vary for each band.
7. Polarity
Polarity
Polarity
Polarity – reverses the polarity of the selected frequency band.
8. Mute LED
Mute LED
Mute LED
Mute LED – indicates mute staus of the selected channel.
9. Mute key
Mute key
Mute key
Mute key – one latching mute switch per output channel. Press to mute; press again to un-
mute.
mute.
10. Output meters
Output meters
Output meters
Output meters – LED ladder displays headroom before limiting occurs. The lower four green
LEDs indicate –24dB, -12dB, -6dB and –1dB respectively, with the orange ‘LIM’ LED set at the
limiter threshold for that channel. The top, red LED indicates 4dB of limiting.
LEDs indicate –24dB, -12dB, -6dB and –1dB respectively, with the orange ‘LIM’ LED set at the
limiter threshold for that channel. The top, red LED indicates 4dB of limiting.
11. Power
Power
Power
Power – green LED indicates that power is applied to the unit.
12. Standy Mute
Standy Mute
Standy Mute
Standy Mute – red LED indicates when the standby mute mode is set.
13. Limiter Cancel
Limiter Cancel
Limiter Cancel
Limiter Cancel – indicates when the limiter cancel mode is set.
1
2 4 5
7
8
11 12
3
6
9
10
POL
13