Avanti WC3201D Benutzerhandbuch

Seite von 17
 
10 
?
 
When you store mostly white wines, the temperature  needs  to be set at between 50 to 59
?
 F and 
the LED lamp above “WHITE” will be lit. 
?
 
When you store mostly sparkling wines, the temperature needs to be set at between 45 to 49
?
 F 
and the LED lamp above “SPARKL” will be lit. 
?
 
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the 
? C 
button.  You can select temperature display setting from Celsius to Fahrenheit degree by pushing 
the 
? F button. Fahrenheit and Celsius degrees indicator will appear on display. 
 
SPARKL:   SPARKLING WINES/ROSE WINES                         45 - 49
?
 F 
WHITE: 
WHITE WINES/DRY                                                  50 - 59
?
 F 
RED: 
RED WINES                                                               60 – 65
?
 F  
 
 
 
 
 
 
NOTE: 
?  Put power switch to “OFF” position stops the cooling cycle but does not shut off the power to the 
appliance . 
?  If the unit is unplugged, has lost power, or is turned off; you must wait 3 to 5 minutes before 
restarting the unit.  If you attempt to restart before this time delay, the appliance will not start. 
 
STORAGE 
Many bottles may differ in size and dimensions. As such the actua l number of bottles you may be able 
to store may vary. 
 
 
INTERIOR LIGHT 
?
 
You can turn the interior light on by pushing the LIGHT ON/OFF button. 
?
 
The light will turn off automatically if it remains ON for 10 minutes  or more. 
?
 
Otherwise turn it off by pushing the LIGHT ON/OFF button. 
 
 
DOOR LOCK  
The  keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock 
and turn it counterclockwise to unlock the door. To lock the door do the reverse operation marking 
sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping. 
 
 
CARE AND MAINTENANCE 
 
REPLACING YOUR LIGHT BULB 
NOTE: 
All parts removed must be saved to do the replacement of the light bulb. 
Before removing the light bulb, either unplug the appliance or disconnect the electricity leading 
into the appliance at the main power supply. Failure to do so could result in electrical shock or 
personal injury. 
?
 
Press the power switch to the “OFF” position. 
?
 
Remove the screw “5”. 
?
 
Remove the light bulb cover “4” by pulling the bottom end of the light bulb cover gently.  
?
 
Unscrew the bulb “2”. 
?
 
Replace with a 10-watt bulb that is the same shape and size. 
?
 
Replace the light bulb cover “4” and tighten screw “5”.