JVC DT-V21G11Z Benutzerhandbuch
21
INFORMATION
Settings for the information display of the monitor.
Item
Content
Setting value
POSITION
Select the position to show the information display (☞ “On the
Information Display” on page 11).
Information Display” on page 11).
UPPER
LOWER
LOWER
SOURCE ID
Select whether the name assigned in “CHARACTER SET.” is displayed on
the screen (☞ “On the Information Display” on page 11).
• When “AUTO” is selected, the display color synchronizes with the color
the screen (☞ “On the Information Display” on page 11).
• When “AUTO” is selected, the display color synchronizes with the color
of the tally lamp while the tally lamp is lit.
OFF
ON
AUTO
ON
AUTO
CHARACTER SET. *
1
Assign a name to each video source as you like (10 characters at maximum).
You can also enter a name using the RS-232C system.
You can also enter a name using the RS-232C system.
Setting of “CHARACTER SET.”
1
Change the input to one that you want to assign a video source
name for.
2
Select “CHARACTER SET.”
3
Press
the buttons to select a character to enter at first.
●
Each time you press the button, the characters change in the
following order. Press button to reverse the order.
space
4
Press button to move the arrow to the next space.
●
The characters entered before moving the arrow are memorized.
5
Repeat
steps
3 and 4 (10 characters at maximum).
6
Press MENU button to store the name.
STATUS DISPLAY
Select whether the status of the current input and the setting of MUTING
are displayed on the screen (☞ “On the Status Display” on page 12).
are displayed on the screen (☞ “On the Status Display” on page 12).
AUTO, OFF, ON
TIME CODE
Select the type of the TIME CODE display.
VITC *
2
, LTC *
2
, D-VITC
CRC ERROR
Select whether the CRC error indication for the input HD SDI/SD SDI signal
is displayed on the screen (☞ “On the Information Display” on page 11).
is displayed on the screen (☞ “On the Information Display” on page 11).
OFF
ON
ON
SUB HOUR METER
Display the hours of use (unit: hour).
You can reset this item.
You can reset this item.
MODEL
Display the model name of the monitor.
VERSION
Display the version of the monitor.
HOUR METER
Display the total hours of use (unit: hour).
This item is used for maintenance of the monitor. You cannot reset this item.
This item is used for maintenance of the monitor. You cannot reset this item.
*
1
Memorized for each input.
*
2
Ancillary time code
all reset
Restores all the settings and adjustments of the monitor to the default.
●
“HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.
●
If reset while the AC power is on, the monitor turns off (standby), and then turns on automatically.
DTV21G11_LCT2681.indb 21
DTV21G11_LCT2681.indb 21
12.2.5 10:17:06 AM
12.2.5 10:17:06 AM