Konica Minolta bizhub C652DS Benutzerhandbuch
bizhub C652/C652DS/C552/C552DS/C452
7-19
7.1
System Settings
7
2nd Z-Fold Position Adjustment
Adjust the second paper folding position for each paper size when using the Z-fold function.
0
Before making any adjustments, create a sample using the Z-fold function. Adjust the center staple
position while checking the created sample.
position while checking the created sample.
0
This adjustment is available if the Z Folding Unit is installed.
1
Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö
[Finisher Adjustment] ö [2nd Z-Fold Position Adjustment].
[Finisher Adjustment] ö [2nd Z-Fold Position Adjustment].
2
While checking the sample, press [+] or [-] to adjust the second folding position.
% The distance between the left end of paper and the second Z-fold position must be 2 mm or more.
3
Press [OK].
4
Create a sample, and check the print result.
Punch Unit Size Detect Sensor
If the punch position is displaced depending on the paper tray, the punch unit is automatically adjusted.
0
This adjustment is available if the Z Folding Unit or Punch Kit PK-516 is installed.
1
Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö
[Finisher Adjustment] ö [Punch Unit Size Detect Sensor].
[Finisher Adjustment] ö [Punch Unit Size Detect Sensor].
2
Press [Start].
% The punch unit edge sensor is automatically adjusted.
% The adjusted result appears.
2nd Z-Fold Position
2 mm or more