Konica Minolta bizhub C652DS Benutzerhandbuch

bizhub C652/C652DS/C552/C552DS/C452

7-54

The enhanced security mode cannot be enabled when any of the current functional settings conflict with the 
enhanced security mode.

When the enhanced security mode is enabled, the settings required for the mode or the settings that have 
been forcibly switched when entering the mode cannot be changed.

To enable the enhanced security mode, the following settings must have been configured.

When the enhanced security is enabled, the following settings are forced.

-

The changed settings will not revert when the enhanced security mode is turned off.

-

After the password rules have been changed, any passwords that do not comply with the changed rules 
will not be authenticated. For details on the password rules, refer to page 7-51.

-

For details on the network settings to be forcibly changed, refer to the "User's Guide [Network 
Scan/Fax/Network Fax Operations]".

User Authentication/Account Track / General Set-
tings / User Authentication

Select either [ON (External Server)] or [ON (MFP)].
•

 When you enable account track, select [Ac-
count Name & Password] for the account track 
input method.

Security Settings / Administrator Password

Set a password complying with password rules.

Security Settings / HDD Settings / HDD Lock Pass-
word

Set an HDD lock password.

[Security] in PageScope Web Connection / PKI 
Settings / SSL Setting 

•

Set [Mode using SSL/TLS] to [Administrator 
mode] and [User mode].

•

Set [Encryption Strength] to [AES-256] or 
[3DES-168].

•

Image controller setting

•

Management function setting

•

CE password

•

CE authentication function

•

HDD installation setting

All the settings above must be configured by your 
service representative.

These items must be configured by your service 
representative. For details, contact your service 
representative.

System Settings / Restrict User Access / Restrict 
Access to Job Settings / Registering and Changing 
Addresses

Set to [Restrict].

User Authentication/Account Track / General Set-
tings / Pubic User Access

Set to [Restrict].

User Authentication/Account Track / User Authen-
tication Settings / Administrative Settings / User 
Name List

Set to [OFF].

User Authentication/Account Track / Print without 
Authentication

Set to [Restrict].

Network Settings / FTP Setting / [FTP Server Set-
tings]

[FTP Server Settings] is not displayed.

Network Settings / SNMP Setting / SNMP v1/v2c 
Settings

[Write Setting] is set to [Disable].

Network Settings / SNMP Setting / SNMP v3 Set-
tings

In [Write User], [Security Level] cannot be set to 
[OFF].

Network Settings / TCPSocket Settings

[Use SSL/TLS] is set to [ON].

Network Settings / WebDAV Settings / WebDAV 
Server Settings / SSL Settings

Set to [SSL Only].