Konica Minolta bizhub C652DS Benutzerhandbuch
bizhub C652/C652DS/C552/C552DS/C452
4-4
4.1
About the [Start] key, the [Stop] key, and the [Interrupt] key
4
4.1
About the [Start] key, the [Stop] key, and the [Interrupt] key
The [Start] key
%
Start the copy, scan or fax operation.
Press this key again to restart a suspended job.
% When this machine is ready to begin the operation, the indicator on the [Start] key lights up in blue.
If the indicator on the [Start] key lights up in orange, the copy operation cannot begin. (Check that
no warning or message is displayed in the touch panel.)
no warning or message is displayed in the touch panel.)
The [Stop] key
%
Press the [Stop] key while copying to temporarily stop the scanning or printing operation.
% To resume a temporarily stopped job, press the [Start] key.
% To delete a temporarily stopped job, select a job in the suspended job list in the screen, and press
the [Delete] key.
The [Interrupt] key
Press this key to start a new copy job with different copy settings by suspending the current job in process.
This is convenient when you need to make copies urgently.
This is convenient when you need to make copies urgently.
0
The [Interrupt] key cannot be operated while an original is being scanned.
0
Pressing the [Interrupt] key restores the default settings.
1
Load the original.
2
Press the [Interrupt] key.
The indicator on the Interrupt key lights up in green and printing of the current job is suspended.
3
Configure the copy settings.
4
Press the [Start] key.
5
After the interrupting job has finished printing, press the [Interrupt] key.
The Interrupt indicator goes off and the interrupting copy settings are canceled.
The copy settings return to those specified before the interrupting copying job.
The [Reset] key
Resets all settings (except programmed settings) entered using the control panel or touch panel.
%
Press the [Reset] key.
The basic settings screen appears.