Nikon L22 Benutzerhandbuch

Basic Camera Setup: The Setup Menu

Sh

oot
in

g, P
laybac

k an
d Se

tu

p Me

nus

k

When the camera is on and a period of time passes without any operations, the 
camera will enter the standby mode (

A 15) to save power.

When the camera enters standby mode, the power-on lamp flashes. If no 
operations are performed within three minutes, the camera turns off.

Use this option to set the amount of time that passes before the camera enters 
standby mode.

Press d M z (setup menu) (A 86) M k Auto off

Auto off

Choose the time allowed to elapse before the camera enters standby mode if no 
operations are performed from 

30 s (default setting), 1 min, 5 min, and 30 min.

Sleep Mode

If 

On (default setting) is selected, the camera will enter standby mode when there 

is no change in the brightness of the subject, even before the time selected in the 
auto off menu has elapsed. The camera will enter sleep mode after 30 seconds 
when 

Auto off is set to 1 min or less, or after 1 minute when Auto off is set to 

5 min or more.

B

The time allowed to elapse before the camera enters standby mode is fixed in the following cases:

• While menus are displayed: 3 minutes
• While slide show is in progress: Up to 30 minutes

C

Cancel standby mode and reactivate the monitor by pressing any of the following buttons.

• Power switch
• Shutter-release button
• A button
• c button