Samsung LE27S7 Benutzerhandbuch
English-27
Viewing Product information
You can view your product information. For service or repair, please contact a
Samsung approved dealer.
1. Press the d.menu button to display the DTV menu.
2. Press the or button to select "System", then press the enter button.
3. Press the enter button again, to select "Product Information".
1. Press the d.menu button to display the DTV menu.
2. Press the or button to select "System", then press the enter button.
3. Press the enter button again, to select "Product Information".
The Product Information menu is selected.
- Software Version, Firmware Version
4. Press the exit button to exit.
Checking the Signal information
upgrading the Software (option)
You can get information about the signal status.
1. Press the d.menu button to display the DTV menu.
2. Press the or button to select "System", then press the enter button.
3. Press the or button to select "Signal Information",
1. Press the d.menu button to display the DTV menu.
2. Press the or button to select "System", then press the enter button.
3. Press the or button to select "Signal Information",
then press the
enter
button.
4. Press the exit button to exit.
If the signal status is poor, the "No signal." message is displayed.
To keep your product up-to-date with new Digital Television features then software
upgrades are periodically broadcast as part of the normal Television signal.
It will automatically detect these signals and display the software upgrade banner.
You are given the option to install the upgrade.
Upgrade Now
If you select "Upgrade Now", the "iDTV" immediately installs the new upgrade and then
restarts.
Upgrade Later
Upgrade Later
If you select "Upgrade Later", the upgrade is postponed until the next restart or channel
change some 90 minutes later, when the upgrade dialog appears again.
Don’t Upgrade
Don’t Upgrade
If you select "Don’t Upgrade", the "iDTV" does not perform the upgrade and the
software upgrade banner is not displayed again.
The upgrade is still stored internally, to subsequently upgrade to the new version then
the following sequence of steps are performed.
1. Press the d.menu button to display the DTV menu.
2. Press the or button to select "System", then press the enter button.
3. Press the or button to select "Software Upgrade",
2. Press the or button to select "System", then press the enter button.
3. Press the or button to select "Software Upgrade",
then press the
enter
button.
4. To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
5. Press the exit button to exit.
BN68-01007K-00Eng.indd 27
2006-07-05 �� 4:56:11