Sony UPX-C100 Benutzerhandbuch
Troubleshooting
69
Camera LCD
Playback
Printing
Picture Quality
Symptom
Cause/Solution
If the camera is
used in a cold
location, residual
images may
appear on the
LCD.
Black spots may
appear or red,
blue, green, or
other color spots
may remain on the
LCD.
used in a cold
location, residual
images may
appear on the
LCD.
Black spots may
appear or red,
blue, green, or
other color spots
may remain on the
LCD.
• This is a normal phenomenon associated
with LCDs.
tThis is not a malfunction.
tThis is not a malfunction.
A printer icon
appears in the
center of the LCD,
and the camera
does not operate.
appears in the
center of the LCD,
and the camera
does not operate.
• The printer is printing a picture.
tWait until printing finishes and
perform the operation again.
The display image
freezes for a while
after data
transmission ends.
freezes for a while
after data
transmission ends.
• Paper is being fed to the printer.
tThe display image will change when
the paper finishes feeding and printing
begins.
begins.
Symptom
Cause/Solution
The DELETE
screen does not
appear, even if the
screen does not
appear, even if the
/ button is
pressed.
• The PICTURE INFO screen is displayed
in Playback mode.
tPress the MENU/GO BACK button to
tPress the MENU/GO BACK button to
return to the MENU screen for
Playback mode.
Playback mode.
The display does
not zoom in, even
if the zoom lever
is pressed toward
not zoom in, even
if the zoom lever
is pressed toward
.
Symptom
Cause/Solution
Pictures do not
print, even if the
print, even if the
/
button is
pressed.
• The camera is set to Capture mode.
tPictures can only be printed from
auto-review display or Playback
mode.
mode.
• The PICTURE INFO screen is displayed
in Playback mode.
tPress the MENU/GO BACK button to
tPress the MENU/GO BACK button to
return to the MENU screen for
Playback mode.
Playback mode.
Symptom
Cause/Solution
The picture is blurred.
• The picture is out of focus.
tCheck the distance between the
lens and the subject, and make
sure the subject is within the
focus range.
sure the subject is within the
focus range.
• The camera was moved when the
release button was pressed.
tHold the camera correctly and
tHold the camera correctly and
press the release button slowly.
• The shutter speed was too slow
because EXPOSURE & FLASH is
set to
set to
or
.
tSet the appropriate shooting
conditions. (See “Setting the
Shooting Conditions” on page 38)
Shooting Conditions” on page 38)
• The lens is dirty.
tClean the lens with a clean, soft,
dry cloth.
The picture is too dark. • Something (such as a finger) was
blocking the flash.
tHold the camera correctly and
tHold the camera correctly and
make sure nothing is blocking the
flash.
flash.
• The subject was too far away.
tMake sure the subject is within
flash range when taking the
picture.
picture.
tCompensate the exposure.
• The subject was backlit.
tUse the flash.
The colors in a picture
taken indoors are not
correct.
taken indoors are not
correct.
• The lighting is affecting the colors.
tSet the white balance correctly.
Part of the picture is
missing.
missing.
• Something (such as a finger) was
blocking the lens.
tHold the camera correctly and
tHold the camera correctly and
make sure nothing is blocking the
lens.
lens.
The area around the
subject is dark.
subject is dark.
• The built-in flash was used with
FULL/HIGH/STD.
tTake the picture with HIGH-ID/
tTake the picture with HIGH-ID/
STD-ID.