NAD C 375BEE C375BEE-CT Benutzerhandbuch

Produktcode
C375BEE-CT
Seite von 4
Features
The  C  375BEE  is  fully  remote  controlled  and  comes 
supplied  with  the  NAD  SR  8  system  remote  control.   
The remote control features an ergonomic form, with 
large  buttons  that  are  differentiated  by  shape  and 
position,  to  make  operation  intuitive  and  enjoyable.  
The SR 8 will also operate many other NAD products 
such as CD players, tuners, etc.
Flexibility is another NAD strong point. The C 375BEE 
has  7  line  inputs  (including  2  tape  in/outputs  with 
dubbing facility) and the pre-amplifier section can be 
separated from the power amplifier for easy upgrades 
or  adding  ancillary  equipment.  Thus  the  C  375BEE 
can be expanded to meet future system needs.  The 
C  375BEE  sports  pre-amp  outputs:  Many  systems 
benefit  from  the  use  of  multiple  power  amplifiers 
for “Bi-Amping” (using separate power amplifiers to 
drive  the  bass  and  treble  section  of  a  loudspeaker). 
The first Preamp Out includes a level trim control to 
allow  matching  of  amps  or  speakers  with  different 
sensitivities.   Additionally  there  is  a  second  Preamp 
Out to connect to powered subwoofer, an increasingly 
popular  option.  Another  option  is  to  ‘bridge’  the  
C 375BEE and add the matching C 275BEE (identical 
except without the preamp and source switching) for 
one of the most powerful home audio systems you’ll 
ever encounter.  Power goes from 150W x 2 to over 
400W x 2!
For remote on/off switching of ancillary components in 
a system, such as power amplifiers or active speakers, 
the C 375BEE is equipped with a 12V-trigger system. 
When  switching  the  amplifier  on,  the  12V-trigger 
output is also activated which in turn can activate a 
12V-trigger  input,  switching  on  the  remote  devices. 
Besides the 12V-trigger, the C 375BEE also has rear 
panel IR in and out.  
It  is  fashionable  to  omit  tone  controls  nowadays: 
However, provided that the tone controls are properly 
designed,  they  can  be  really  useful  tools  in  making 
improvements  to  the  overall  sound.  The  C  375BEE 
tone  controls  only  work  at  frequency  extremes 
leaving  the  critical  mid-band  essentially  unaltered.  
The tone control circuits can be completely bypassed 
using  the  tone  defeat  switch.  The  C  375BEE  also 
incorporates  NAD’s  acclaimed  switchable  “Soft 
Clipping” circuit, which significantly reduces the risk 
of  damage  to  loudspeakers  due  to  prolonged  high 
power operation.
Design:  PowerDrive
TM
The  C  375BEE  also  benefits  from  NAD’s  proprietary 
PowerDrive
TM
  circuit  topology,  now  well  established 
and  used  throughout  the  NAD  product  range.   The 
PowerDrive  topology  allows  the  C  375BEE  to 
deliver  maximum  performance  under  virtually  any 
circumstance,  independent  of  the  loudspeakers  it 
is  driving.  The  circuitry  automatically  senses  the 
impedance characteristics of the loudspeaker and will 
then adjust its power supply settings to best cope with 
that specific load. PowerDrive topology is a practical 
approach  to  enable  an  amplifier  to  easily  deal  with 
musical  dynamics  and  difficult  speaker  loads.    Thus 
we  have  the  highly  desirable  characteristics  of  high 
dynamic power and low impedance drive capability in 
one affordable package.  
Getting high dynamic power from the power supply to 
your  loudspeaker  requires  a  fast  wideband  amplifier 
stage rugged enough to pass and control high peak 
currents  without  premature  protection  intervening.  
The  safe  operating  limit  for  the  C  375BEE  has  4 
times the capacity of the typical amplifier in this price 
range  by  using  4  pairs  of  220W  output  transistors  
per channel.
The C 375BEE has the lowest levels of distortion and 
noise available in its price class and is easily capable of 
embarrassing far more expensive products.  To prove 
it  NAD  uses  Full  Disclosure  Power  (FDP),  the  most 
demanding criteria for performance measurement. FDP 
specifies distortion under the most extreme conditions 
of  low  impedance  loads  and  frequency  extremes 
rather than the simple and easy 1kHz @ 8 Ohms test 
quoted by many of our competitors. We use this stricter 
performance criteria because it more closely matches 
the  demands  of  real  music  and  real  loudspeakers.   
Maintaining  specified  distortion  at  4  Ohms  and  at 
20Hz  and  20kHz  is  several  orders  of  magnitude 
more  difficult  to  achieve  than  the  simple  8  Ohms  
and 1kHz test.  
NAD  also  takes  a  stand  against  the  meaningless 
“brochure power” touted by many of our competitors 
by  offering  Full  Disclosure  power  specs.   We  specify 
minimum continuous power, across the entire audible 
range  of  frequencies,  at  rated  distortion,  for  both  8 
and 4 Ohms with all channels driven 
simultaneously
.  
Perhaps  even  more  importantly,  we  also  specify 
Dynamic Power at 8, 4, and even 2 Ohms, which better 
describes  the  way  the  amplifier  will  perform  in  the  
real  world,  with  musical  signals  and  reactive 
loudspeaker loads.  
Less Distortion = More Music
Noise and distortion mask the fine details of a musical 
recording robbing musical texture and dimension and 
replacing  them  with  non-musical  artifacts.  NAD  has 
spent the last 35 years perfecting our designs to have 
the  lowest  distortion  and  highest  power  in  its  price 
class.   This  cannot  be  overstated!    Our  competitors 
often rate distortion at only 80% of rated power, and 
even then can’t match our very conservative spec of 
0.009% at any frequency within the range of human 
hearing.  Our  noise  spec  is  often  10dB  (100  times!) 
less  than  that  of  competing  amplifiers.    This  is  far 
from  a  trivial  difference  as  fine  detail  and  nuance 
(micro dynamics) are often obscured by noise in lesser 
amplifiers, robbing a performance of that illusive sense 
of ‘realism’.   It is that exciting feeling of being there at 
the live performance.
But even the most carefully reported specs cannot fully 
describe the sonic performance of an amplifier.  Only 
your own ears can finally judge our achievement.  We 
urge you to listen and compare NAD to other products 
in  its  price  range,  and  even  higher.   We  don’t  think 
you’ll find anything that comes close to offering the 
C 375BEE’s overall musical satisfaction, well-rounded 
performance, and stellar value for money. 
 
>   D E T A I L S