Digium G201 1G201F Anleitung Für Quick Setup
Produktcode
1G201F
Thank you for your purchase of a Digium® Gateway
Series appliance. This document provides a quick
introduction to your new gateway appliance. For
detailed installation and setup information, please refer
to the product manual available on www.digium.com.
Series appliance. This document provides a quick
introduction to your new gateway appliance. For
detailed installation and setup information, please refer
to the product manual available on www.digium.com.
EULA
By installing and configuring this Digium Gateway Series
appliance, you are agreeing to the terms and conditions
of the End-User License Agreement for Digium Gateway
Series Software and the Digium Gateway Series (EULA).
This license is available for review on www.digium.com.
appliance, you are agreeing to the terms and conditions
of the End-User License Agreement for Digium Gateway
Series Software and the Digium Gateway Series (EULA).
This license is available for review on www.digium.com.
Warranty
The warranty terms for the Digium Gateway Series
appliance are available on www.digium.com. Please
register your Digium Gateway Series appliance at
www.digium.com/register.
appliance are available on www.digium.com. Please
register your Digium Gateway Series appliance at
www.digium.com/register.
What’s Inside
The Gateway Series comes protected by foam inserts. In
the box you will find:
the box you will find:
•
This Quick Start Guide
•
Gateway Series appliance
•
Power cord with attached T1/E1 loopback plug
•
Mounting brackets (2 each)
•
Bracket mounting screws, #8-32 black truss
head, Phillips, 3/16” length (6 each)
•
Side-by-side mounting screws, #6-32 pan head,
Phillips, 3/16” length (3 each)
•
Side-by-side mounting shoulder washers (3
each)
•
Rubber feet (4 each)
•
Ground nut
•
Double-crimp ground ring terminal
613-00013-A
Mounting Instructions
1.
The appliance can be rack mounted, wall
mounted, or placed on a level surface. Refer to
the manual for additional information.
the manual for additional information.
2.
Use the provided ground terminal and ground
nut to ground the appliance to your computer
rack or cabinet. Refer to the manual for
additional information.
rack or cabinet. Refer to the manual for
additional information.
Installation and Setup
The Gateway Series is managed through its web GUI.
The default IP address of the web GUI is
https://192.168.69.1. Please refer to the Gateway
Series administrator manual for detailed installation
and setup information. The latest manual can be
obtained by going to:
The default IP address of the web GUI is
https://192.168.69.1. Please refer to the Gateway
Series administrator manual for detailed installation
and setup information. The latest manual can be
obtained by going to:
http://www.digium.com
Digium, Inc
445 Jan Davis Drive NW
Huntsville, AL 35806
United States
Tel: +1 256 428 6000
Website: www.digium.com
Gateway Series Appliance
Quick Start Guide