Philips Car media docking system CMD305A CMD305A/05 Benutzerhandbuch

Produktcode
CMD305A/05
Seite von 29
15
EN
6  Use Bluetooth 
devices
With this car audio system, you can listen to 
audio from a player or make a call through 
Bluetooth.
Pair a device
Note
 
Philips does not guarantee the compatibility with all 
Bluetooth devices.
 
Before pairing a device with this system, read its user 
manual for Bluetooth compatibility. Make sure that the 
Bluetooth firmware version of the device is V2.1 or
later.
 
Make sure that Bluetooth function is enabled on your 
device, and your device is set as visible to all other 
Bluetooth devices.
 
The operational range between this system and a 
Bluetooth device is approximately 3 meters (10 feet).
 
Any obstacle between this system and a Bluetooth 
device can reduce the operational range.
 
Keep away from any other electronic device that may 
cause interference.
On your device, follow the steps below.
1
Enable it to search for other Bluetooth 
devices.
In the device list, select CMD305A.
Enter the default password "0000".
 
»
If the pairing is successful, [PAIR OK] 
is displayed.
Disconnect a device
1
Press and hold   until [BT DISCO] is 
displayed.
Press 
to confirm.
 
»
[DISCONNECTED] scrolls.
Tip
 
You can also disable the Bluetooth function on this 
connected device.
Reconnect a device
1
Press and hold   until [BT RECON] is 
displayed.
Press 
to confirm.
•  If the auto connection between 
CMD305A and this device is 
authorized, CMD305A reconnects to 
this device automatically. If not, perform 
step 3.
On this device, accept the connection 
request from CMD305A. 
 
»
[CONNECTED] scrolls.
Play audio from a connected 
device
If the connected Bluetooth device supports 
Advanced Audio Distribution Profile (A2DP),
you can listen to tracks that are stored on the 
device through the system. If the device also 
supports Audio Video Remote Control Profile
(AVRCP) profile, you can control play on the
system.
1
Connect the Bluetooth device to this 
system via Bluetooth.
Press 
 repeatedly to switch the source 
to [BT AUDIO].
 
»
Play starts automatically.
•  If play does not start, press 
.
•  To pause play, press 
 again.
•  To skip to the previous or next track, 
press 
 / 
.
CMD305A_05_UM_V2.1.indb   15
9-1-2013   10:42:32