Sony FWD-S42H2 Benutzerhandbuch
FWD
-S55H2/S46H2/S42H2 F
ull HD LED Public Display
Picture-in-Picture
All S-Series displays allow the picture from a secondary
source to be displayed within the main picture.
source to be displayed within the main picture.
Display Control Via RS232C/RJ45
Users can monitor the display status and control multiple
displays over LAN, VPN, or the Internet using Microsoft
displays over LAN, VPN, or the Internet using Microsoft
®
Internet Explorer
®
7.0 or later.
Slim Installation Design
The depth of the displays is at least 20% less than
that of a conventional CCFL model from Sony. For
slim installation, the Signal In and Signal Out terminals
are incorporated into this profile and do not protrude
from the unit.
that of a conventional CCFL model from Sony. For
slim installation, the Signal In and Signal Out terminals
are incorporated into this profile and do not protrude
from the unit.
DICOM-simulated Gamma Setting
The gamma setting is in accordance with the DICOM
(Digital Imaging and Communications in Medicine)
GSDF (Grayscale Standard Display Function) standard.
(Digital Imaging and Communications in Medicine)
GSDF (Grayscale Standard Display Function) standard.
VESA-compliant Flexible Mounting
VESA-compliant mounting points help ensure safety
when units are mounted. Optional mounting brackets
are sold separately.
when units are mounted. Optional mounting brackets
are sold separately.
Multi-display
All S-Series displays can present a single large dynamic
image, simply by combining up to 16 display units (1x2,
1x3, 1x4, 2x1, 3x1, 4x1, 2x2, 3x3, 4x4)*.
image, simply by combining up to 16 display units (1x2,
1x3, 1x4, 2x1, 3x1, 4x1, 2x2, 3x3, 4x4)*.
* Multi-display function supports progressive signals only.
Screen Saver
Images with constant brightness (such as data and
still images) can cause screen burn-in on a display. To
prevent this, three screen saver patterns are provided
and can be adapted for customer usage.
still images) can cause screen burn-in on a display. To
prevent this, three screen saver patterns are provided
and can be adapted for customer usage.
Eco mode
In Eco mode, power consumption is reduced using
power-saving technology*. Compared with Standard
mode, power consumption using the High setting is
approximately 50% less in Eco mode and using the
Low setting is approximately 30% less in Eco mode.
power-saving technology*. Compared with Standard
mode, power consumption using the High setting is
approximately 50% less in Eco mode and using the
Low setting is approximately 30% less in Eco mode.
* Brightness is also lowered.
User-friendly Remote Control
Each display comes with a dedicated remote control
unit, designed with careful attention to button shapes,
sizes, spacing and layout. When working with multiple
displays, the operator can use the remote’s ID MODE
button to control each display separately.
unit, designed with careful attention to button shapes,
sizes, spacing and layout. When working with multiple
displays, the operator can use the remote’s ID MODE
button to control each display separately.
Control Panel Lock
The control panel lock function can disable the control
panel of a display to prevent unauthorised changes to
display settings.
panel of a display to prevent unauthorised changes to
display settings.
Power-on Delay
Switching on multiple displays at the same time can
potentially cause a damaging power surge. The Power-
on Delay feature minimises this risk by allowing the user
to stagger the timing so that each unit powers up at a
slightly different time.
potentially cause a damaging power surge. The Power-
on Delay feature minimises this risk by allowing the user
to stagger the timing so that each unit powers up at a
slightly different time.
Simulated images
Standard Gamma
(Mid mode)
DICOM-simulated
Gamma
FWD-S55H2, FWD-S46H2, and FWD-S42H2
VESA pitch:
400x400
In and out terminals
Installed side view images
FWD-S55H2
Centre
LAN
Back aspect
connection type