HP A3100-24-PoE EI JD313A Datenbogen

Produktcode
JD313A
Seite von 13
5
HP A3100 EI Switch Series
Specifications
HP A3100-8-PoE EI Switch (JD311A)
HP A3100-16-PoE EI Switch (JD312A)
HP A3100-24-PoE EI Switch (JD313A)
Ports
8 auto-sensing 10/100 PoE ports (IEEE 802.3 Type
10Base-T, IEEE 802.3u Type 100Base-TX, IEEE
802.3af PoE); Duplex: half or full
1 dual-personality port; auto-sensing
10/100/1000Base-T or SFP
1 RJ-45 serial console port
16 auto-sensing 10/100 PoE ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE
802.3af PoE); Duplex: half or full
2 dual-personality ports; auto-sensing
10/100/1000Base-T or SFP
1 RJ-45 serial console port
24 auto-sensing 10/100 PoE ports (IEEE 802.3
Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE
802.3af PoE); Duplex: half or full
2 dual-personality ports; auto-sensing
10/100/1000Base-T or SFP
1 RJ-45 serial console port
Physical characteristics
Dimensions
8.66(d) x 11.81(w) x 1.72(h) in. (22. x 30 x 4.36
cm) (1U height)
10.24(d) x 11.81(w) x 1.72(h) in. (26 x 30 x 4.36
cm) (1U height)
16.54(d) x 17.32(w) x 1.72(h) in. (42 x 44 x 4.36
cm) (1U height)
Weight
6.61 lb. (3 kg)
7.72 lb. (3.5 kg)
14.33 lb. (6.5 kg)
Memory and processor
64 MB SDRAM, 8 MB flash; packet buffer size: 384
KB
64 MB SDRAM, 8 MB flash; packet buffer size: 384
KB
64 MB SDRAM, 8 MB flash; packet buffer size: 384
KB
Mounting
Requires angle mounting set if rack mounted (not
included)
Requires angle mounting set if rack mounted (not
included)
Mounts in an EIA standard 19-in. telco rack or
equipment cabinet (hardware included)
Performance
Latency
< 10 µs
< 10 µs
< 10 µs
Throughput
up to 2.6 million pps
up to 5.3 million pps
up to 6.5 million pps
Routing/Switching capacity
3.6 Gbps
7.2 Gbps
8.8 Gbps
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
32°F to 113°F (0°C to 45°C)
32°F to 113°F (0°C to 45°C)
Operating relative humidity
10% to 90%, non-condensing
10% to 90%, non-condensing
10% to 90%, non-condensing
Non-operating/Storage temperature
-40°F to 158°F (-40°C to 70°C)
-40°F to 158°F (-40°C to 70°C)
-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage relative humidity
5% to 95%, non-condensing
5% to 95%, non-condensing
5% to 95%, non-condensing
Electrical characteristics
Maximum heat dissipation
324 BTU/hr (341.82 kJ/hr)
546 BTU/hr (576.03 kJ/hr)
1587 BTU/hr (1674.29 kJ/hr)
Voltage
100-240 VAC
100-240 VAC
100-240 VAC
DC Voltage
-52 V to -56 VDC
Maximum power rating
95 W
160 W
465 W
PoE power
64 W
125 W
370 W
Frequency
50 / 60 Hz
50 / 60 Hz
50 / 60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
PoE power is the power supplied by the internal
power supply. It is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an external power
supply (EPS).
Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
PoE power is the power supplied by the internal
power supply. It is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an external power
supply (EPS).
Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
PoE power is the power supplied by the internal
power supply. It is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an external power
supply (EPS).
With DC input: maximum power is 400 W, PoE
power is 370 W.
Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN
60825-1 Safety of Laser Products-Part 1; EN
60825-2 Safety of Laser Products-Part 2; IEC
60950-1; Anatel; ULAR; GOST; EN 60950-1/A11;
FDA 21 CFR Subchapter J; NOM; ROHS
Compliance
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN
60825-1 Safety of Laser Products-Part 1; EN
60825-2 Safety of Laser Products-Part 2; IEC
60950-1; Anatel; ULAR; GOST; EN 60950-1/A11;
FDA 21 CFR Subchapter J; NOM; ROHS
Compliance
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN
60825-1 Safety of Laser Products-Part 1; EN
60825-2 Safety of Laser Products-Part 2; IEC
60950-1; Anatel; ULAR; GOST; EN 60950-1/A11;
FDA 21 CFR Subchapter J; NOM; ROHS
Compliance
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022
Class A; CISPR 22 Class A; ICES-003 Class A;
ANSI C63.4 2003; ETSI EN 300 386 V1.3.3;
AS/NZS CISPR22 Class A; EN 61000-3-2; EN
61000-3-3; EN 61000-4-2; EN 61000-4-3; EN
61000-4-4; EN 61000-4-5; EN 61000-4-6; EN
61000-4-11; EN 61000-3-2:2006; EN
61000-3-3:1995 +A1:2001+A2:2005; EMC
Directive 2004/108/EC; FCC (CFR 47, Part 15)
Class A
FCC part 15 Class A; VCCI Class A; EN 55022
Class A; CISPR 22 Class A; ICES-003 Class A;
ANSI C63.4 2003; ETSI EN 300 386 V1.3.3;
AS/NZS CISPR22 Class A; EN 61000-3-2; EN
61000-3-3; EN 61000-4-2; EN 61000-4-3; EN
61000-4-4; EN 61000-4-5; EN 61000-4-6; EN
61000-4-11; EN 61000-3-2:2006; EN
61000-3-3:1995 +A1:2001+A2:2005; EMC
Directive 2004/108/EC; FCC (CFR 47, Part 15)
Class A
FCC part 15 Class A; VCCI Class A; EN 55022
Class A; CISPR 22 Class A; ICES-003 Class A;
ANSI C63.4 2003; ETSI EN 300 386 V1.3.3;
AS/NZS CISPR22 Class A; EN 61000-3-2; EN
61000-3-3; EN 61000-4-2; EN 61000-4-3; EN
61000-4-4; EN 61000-4-5; EN 61000-4-6; EN
61000-4-11; EN 61000-3-2:2006; EN
61000-3-3:1995 +A1:2001+A2:2005; EMC
Directive 2004/108/EC; FCC (CFR 47, Part 15)
Class A
Management
IMC - Intelligent Management Center; command-line
interface; Web browser; SNMP Manager
IMC - Intelligent Management Center; command-line
interface; Web browser; SNMP Manager
IMC - Intelligent Management Center; command-line
interface; Web browser; SNMP Manager