ZyXEL 336M 91-003-192BUN2 Benutzerhandbuch

ZyXEL P-336M User’s Guide

53

Chapter 4 Advanced

The following table describes the labels in this screen. 

Internet access control allows you to create and enforce Internet access policies tailored to 
your needs. Access control gives you the ability to block specified computers and/or 
applications from accessing the Internet. You can also set a schedule for when the P-336M 
performs content filtering. 

Click Advanced > Access Control to display the configuration screen as shown. 

Table 20   Advanced: Routing

Add Route

Enable

Select this option to activate this setting. 
This field is not applicable for pre-defined routes. 

Destination IP  

Enter the destination IP address in dotted decimal notation. 

Netmask 

Enter the subnet mask. 

Gateway 

Enter the IP address of the gateway device for the selected interface below. 

Interface

Select an interface to which you want to apply the setting. 

Metric

Metric represents the “cost” of transmission for routing purposes. IP routing uses 

hop count as the measurement of cost, with a minimum of 1 for directly connected 

networks. Enter a number that approximates the cost for this link. The number 

need not be precise, but it must be between 1 and 15. In practice, 2 or 3 is usually 

a good number. 

Save

Click Save to save the settings. 

Clear Click 

Clear to start configuring this part of the screen again. 

Routes List

Enable

Select this option to activate this rule. Clear this check box to disable this rule 

without deleting it. 

Destination IP 

This field displays the destination IP address. 

Netmask 

This field displays the subnet mask for the destination IP address above. 

Gateway

This field displays the IP address of the gateway device. 

Metric

This field displays the “cost” of this route. 

Interface

This field displays the interface to which this routing setting is applied.