HP 701974-FP1 Benutzerhandbuch

You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the

keyboard to navigate and make selections in Computer Setup.

Press 

f10

 to enter Computer Setup.

To exit Computer Setup menus, choose one of the following methods:

●

To exit Computer Setup menus without saving your changes:

Click the Exit icon in the lower-left corner of the screen, and then follow the on-screen
instructions.

– or –

Use the 

tab

 key and the arrow keys to select File > Ignore Changes and Exit, and then press

enter

.

●

To save your changes and exit Computer Setup menus:

Click the Save icon in the lower-left corner of the screen, and then follow the on-screen
instructions.

– or –

Use the 

tab

 key and the arrow keys to select File > Save Changes and Exit, and then press

enter

.

Your changes go into effect when the computer restarts.

Restoring defaults will not change the hard drive mode.

To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

Turn on or restart the computer, and then press 

esc

 while the “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

Press 

f10

 to enter Computer Setup.

Use a pointing device or the arrow keys to select File > Restore Defaults.

Follow the on-screen instructions.

To save your changes and exit, click the Save icon in the lower-left corner of the screen, and
then follow the on-screen instructions.

– or –

Use the arrow keys to select File > Save Changes and Exit, and then press 

enter

.

Your changes go into effect when the computer restarts.

Your password settings and security settings are not changed when you restore the factory

settings.

96

Chapter 5   Computer Setup (BIOS) and Advanced System Diagnostics