HP 701977-151 Benutzerhandbuch

Seite von 159
b.
Lift the bracket (2) straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
Secondary hard drive
NOTE:
The hard drive bracket is included in the Hard Drive Hardware Kit, spare part number
642774-001.
Description
Spare part number
750 GB, 7200-rpm SATA hard drive
633252-001
500 GB, 7200-rpm SATA hard drive
634925-001
320 GB, 7200-rpm SATA hard drive
634862-001
24 GB solid-state drive (includes bracket and screws)
701479–001
Before removing the secondary hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see 
5.
Remove the service access cover (see 
Remove the secondary hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the Phillips M2.5x10.5 captive screws (1) that secure the hard drive to the computer.
56
Chapter 4   Removal and replacement procedures