Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Mobotix
  4. MX-CBL-MU-STR-05
  5. Merkblatt

Mobotix MX-CBL-MU-STR-05 Merkblatt

Download
Seite von 2
The HiRes Video Company
EN
MX-232-IO-Box: Quick Install
www
.mobotix.com
HiRes Video Innovations
The German company MOBOTIX AG is known as the leading pioneer in network camera technology and its 
decentralized concept has made high-resolution video systems cost-efficient.
MOBOTIX AG • D-67722 Langmeil • Tel: +49 6302 9816-0 • Fax: +49 6302 9816-190 • sales@mobotix.com 
Weatherproof Signal Input/
Output and RS232
•  2 self-powered inputs for connecting sensors
•  2 outputs: 1 powered output, 1 isolated relay output (can 
be switched to second powered output)
•  RS232 interface when using USB cable to connect to camera*
Connection of external sensors and switching of 
external devices via MOBOTIX cameras; RS232 
interface, connection to camera using USB or 
MxBus
MX-OPT
-RS1-EXT
31.321_EN_V1_08/2012
Options for Connecting to Cameras
Function
Option 1 – USB
Option 2 – MxBus
2 signal inputs, self-powered
1 powered output 12 V
1 isolated relay output 
(can be switched to powered output 12 V)
RS232 interface
—
Connecting additional MxBus devices to MX-232-IO-Box
—
Length of the connection to the camera
0,5/2/5 m (1.6/6.6/16.4 ft)*
Max. 50 m/55 yd
Technical Specifications
Option 1 – USB
Option 2 – MxBus
Interface to camera
USB
MxBus
Inputs
2 galvanically separated inputs (AC/DC, self-powered, up to 50 V)
Output Out1
Isolated relay output (AC/DC, up to 50 V/60 W/2 A) 
With jumper: Powered output 12 V, max. cable length 50 m (55 yd)
(see 
)
Output Out2
Powered output 12 V, max. cable length 50 m/55 yd
Total output rating
400 mW
500 mW
RS232 interface
Rx, Tx, RTS, CTS, GND, 
max. 115 kbaud
—
Cross-sectional diameters 
of wires at the terminals
Minimum: 0.14 mm² (AWG 26)
Maximum: 0.5 mm² (AWG 20)
Protection class
IP65 (DIN EN 60529)
Operating temperature
-30 to +60°C/-22 to 140°F (DIN EN 50125)
Power supply
USB
MxBus
Power consumption
Typically 1 W
USB Cables for Connection to Camera*
MX-CBL-MU-STR-05/2/5 
(straight/straight)
MX-CBL-MU-EN-STR-05/2/5 
(straight/angled)
MOBOTIX USB cable 0.5/2/5 m 
(1.6/6.6/16.4 ft) 
(order separately)
 
 
MOBOTIX 
S14
—
MOBOTIX D14, D24, M24, Q24, T24
—
*Only use MOBOTIX USB cables! USB cables are not part of the delivery and are to be ordered separately!
Options for Connecting to Camera: 
USB
 
or
 
MxBus
Option 1: MOBOTIX USB cable to the 
camera (0,5/2/5 m (1.6/6.6/16.4 ft))
MOBOTIX MX-232-IO-Box
MX-OPT-RS1-EXT
MOBOTIX D14Di DualDome
MX-D14Di-Sec-D22D22
Option 2: 2-wire MxBus wiring to 
camera (max. 50 m/55 yd)
*Only use MOBOTIX USB cables! USB cables are not part of the delivery and are to be ordered separately!
Caution
One MX-232-IO-Box must not 
be connected to one camera 
via USB 
and
 MxBus at the 
same time!
It is likewise disallowed to 
connect one MX-232-IO-Box 
to several cameras!
Note
If you would like to use twice 
the number of signal inputs 
and outputs, you can attach 
two MX-232-IO-Box modules 
to one camera, one via USB 
and one via MxBus!
Protection class IP65
 
–30 to 60°C/–22 to 140°F
Connection of Peripheral Devices (Examples)
MOBOTIX MX-232-IO-Box
MX-OPT-RS1-EXT
Window sensors
Door sensors
Gate
Lights
RS232 connection
(only when connecting to 
camera via USB cable*)
Pan/Tilt head
Max. 10 m/11 yd
Max. 50 m/55 yd
Weather Station
Relay
(e.g. Eltako 
ER12-002-UC)
Block Diagram of the MX-232-IO-Box
Changing the Mode of Output Out1
In order to use output 
Out1 as powered output, you need to stick 
the jumper on the jumper pins at the right as shown in the figure. 
The other jumper will be used in the future and must 
not be used 
at present. When connecting, use the terminals 
Out1 A and Out2 –. 
Please note that the total output rating of the MX-232-IO-Box is 
split between the two powered outputs in this mode (see 
Specifications»). In this mode, the max. cable length for 
Out1 is 
also 50 m (55 yd).
Output Out1: 
Operating mode can switched to 
"powered output" using the supplied 
jumper!