HP 701977-081 Benutzerhandbuch
6.
Remove the optical drive (see
).
7.
Remove the keyboard (see
8.
Remove the top cover (see
).
9.
Remove the Smart Card reader (see
10.
).
Remove the modem module:
1.
Position the computer right-side up with the front toward you.
2.
Remove the two Phillips M2.0x3.0 screws (1) that secure the modem to the system board.
3.
Lift the modem upwards (2).
4.
Disconnect the modem cable (3) from the modem.
Reverse this procedure to install the modem module.
Display (VGA) port
Before removing the modem module cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the service access cover (see
6.
Remove the optical drive (see
).
98
Chapter 4 Removal and replacement procedures