Epson EH-TW8100 V11H524070LW Benutzerhandbuch
Produktcode
V11H524070LW
Basic Operations
24
Starting and Ending Projection
Turning on the Projector and Projecting
a
Connect the power cable.
Connect using the power cable supplied.
b
Turn on the connected device, and
then turn on the projector's main
power switch.
then turn on the projector's main
power switch.
c
Turn the power on.
Remote control
Control panel
The lens shutter opens, and projection
starts.
starts.
c
When Direct Power On is set to
On, you can start projecting by
simply turning on the main power
switch without having to press any
buttons.
On, you can start projecting by
simply turning on the main power
switch without having to press any
buttons.
s
Extended -
Operation - Direct Power
On
On
Warning
Do not look into the lens during projection.
c
•
This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on.
on and a Control Panel Lock function to prevent accidental operations and so on.
s
Settings - Child
Lock/Control Panel Lock
•
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
s
Extended - Operation -
High Altitude Mode
•
This projector provides an Auto Setup function to automatically select the optimum settings when the
input signal for the connected computer image changes.
input signal for the connected computer image changes.
s
Signal - Auto Setup
•
This projector comes with a Trigger out port to communicate the current status of the projector's power
(on/off) to external devices. When using this function, set Trigger Out.
(on/off) to external devices. When using this function, set Trigger Out.
s
Extended - Operation -