Cisco 4-MB Flash Memory Module MEM830-4F= Benutzerhandbuch
Produktcode
MEM830-4F=
5
Upgrading Memory in Cisco 800 Series Routers
OL-4360-04
Upgrading the Flash Memory
Locating the Flash Memory Slot
shows where the flash memory module can be installed on the router motherboard. The flash
memory slot location is similar on all Cisco 800 series routers. The connector type may vary for some
Cisco 800 series routers and will look slightly different from the one illustrated below.
Cisco 800 series routers and will look slightly different from the one illustrated below.
Figure 2
Location of Flash Memory Slot
Locating the StrataFlash Memory Slot
shows where the StrataFlash memory module can be installed on the router motherboard. The
StrataFlash memory slot location is similar on all Cisco 800 series routers. The orientation of the
connector may vary for some Cisco 800 series routers, with the opening turned inward instead of
outward as illustrated below.
connector may vary for some Cisco 800 series routers, with the opening turned inward instead of
outward as illustrated below.
Figure 3
Location of StrataFlash Memory Slot
Installing Flash Memory
To upgrade the flash memory, you must install a mini-flash memory module on the router motherboard,
as shown in
as shown in
ETHERNET 10 BASE
T
TO HUB
TO PC
0
1
2
3
CONSOLE
Cisco 804
PHONE
1
2
CONSOLE
Flash memory slot
41862
82301
ETHERNET
4
3
2
1
Cisco 837
ADSL
+18 VDC
CONSOLE
Strata Flash slot
ON
OFF