ZyXEL 4-port Prestige 792H Router 91-004-342001 Benutzerhandbuch

Produktcode
91-004-342001
Seite von 428
Prestige 791R G.SHDSL Router 
Filter Configuration 
 
28-11 
Table 28-3 TCP/IP Filter Rule 
FIELD DESCRIPTION 
EXAMPLE 
IP Protocol 
This is the upper layer protocol, for example, TCP is 6, 
UDP is 17 and ICMP is 1. The value must be between 0 
and 255. A value of O matches ANY protocol. 
0 to 255 
IP Source Route 
IP Source Route is an optional header that dictates the 
route an IP packet takes from its source to its destination. 
If Yes, the rule applies to any packet with an IP source 
route. The majority of IP packets do not have source 
route. 
No 
(default) 
Destination: 
IP Addr 
Type the destination IP address of the packet you want to 
filter. This field is ignored if it is 0.0.0.0. 
IP address 
IP Mask  Type the IP mask to apply to the Destination: IP Addr 
field. 
IP mask 
Port #  Type the destination port of the packets you want to filter. 
The field range is 0 to 65535. A 0 field is ignored. 
0 to 65535 
Port # Comp  Select the comparison to apply to the destination port in 
the packet against the value given in Destination: Port #. 
Choices are NoneLessGreaterEqual or Not Equal
None 
Source: 
IP Addr 
Type the source IP Address of the packet you want to 
filter. A 0.0.0.0 field is ignored. 
IP address 
IP Mask  Type the IP mask to apply to the Source: IP Addr field. 
IP mask 
Port #  Type the source port of the packets you want to filter. The 
range of this field is 0 to 65535. A 0 field is ignored. 
0 to 65535 
Port # Comp  Select the comparison to apply to the source port in the 
packet against the value given in Source: Port # field. 
Choices are NoneLessGreaterEqual or Not Equal
None 
TCP Estab 
This applies only when the IP Protocol field is 6, TCP.   If 
Yes, the rule matches packets that want to establish TCP 
connection(s) (SYN=1 and ACK=0); else it is ignored. 
No 
(default) 
More 
If Yes, a matching packet is passed to the next filter rule 
before an action is taken or else the packet is disposed of 
according to the action fields. 
If More is Yes, then Action Matched and Action Not 
Matched will be N/A. 
No 
(default)