Bosch VEZ-211-IWCS Benutzerhandbuch

Seite von 756
Digital Recording and Storage | Disk Arrays (Network Attached) | 565
DSA-N2B50 iSCSI Disk
Array Series
Features
▶ Scale-out network storage solution: base unit with up
to six disk shelf expansion units
▶ RAID‑DP (Double Parity) data protection
▶ Redundant hot-swappable power supplies and cooling
fans
▶ Two Gigabit Ethernet ports for high speed iSCSI
connectivity
▶ Modular design for ease of service
▶ Central management through Web-based GUI
The DSDA iSCSI series represent the second generation of
Bosch Digital Video Disk Arrays and are designed for the
security industries most demanding digital video storage
applications to manage the relentlessly growing digital
video data.
Functions
The DSA‑N2B50 is the co-branded FAS Series FAS 2050
from NetApp which provides a scale-out network storage
solution that provides security, highest “in-the-box”
scalability, peace-of-mind data protection, and simplified
management of all your video data. NetApp’s FAS Series
are based on a 15‑year enterprise proven and well tested
OS—Data ONTAP. NetApp pioneered the iSCSI protocol
years ago and remains the market leader.
Designed as a scale-out system, the DSA‑N2B50 allows
connecting up to six disk shelf expansion units to one
base unit. The base unit provides a maximum of 20 x 1 TB
SATA‑II hard disk drives and each disk shelf expansion
unit will provide a maximum of 14 x 1 TB hard disk drives.
The DSA‑N2B50 is a fully featured RAID protected disk
array which provides advanced RAID‑DP protection for
highest data availability. RAID‑DP (Double Parity) is a form
of RAID‑6 without any performance penalty.
High Reliability and Availability
With redundant hot-swap power and cooling, dual Gigabit
Ethernet ports, NVRAM, and protection from double-disk
failure and single bit errors during RAID rebuilds with
RAID‑DP, the DSA‑N2B50 keeps your data safe and
available.
Monitoring
Full SNMP support with agents compatible with SNMP
version 1 as well as MIB‑II and NetApp custom MIBs
supported. In case of component failures SNMP, e-mails
(Autosupport Mails) or HTTP (HTTPS) messages will be
generated.
Features
The intelligent combination of battery backed up
nonvolatile RAM (NVRAM), the NetApp RAID‑DP
technology and the Write Anywhere File Layout (WAFL) all
contribute to data reliability and recoverability and
provide superior system performance.
The RAID‑DP protection allows for capacity expansion on
the fly, with no RAID rebuilt or interruption to users. This
is getting more and more important as HDD capacities are
getting bigger and bigger.
Installation/Configuration Notes
Central management is provided by a Web GUI
administration tool. There is no additional software
necessary to be installed on peripheral devices.
In addition the system provides a powerful Command Line
Interface (CLI) which is fully remote accessible either by
telnet, ssh or rsh.
The DSA-N2B50 provides a maximum bandwidth of
300 Mbps with a maximum of 128 concurrent iSCSI
connections.
The net capacity available is shown in the following table.
Configuration information
Net capacity (GB)
1 x FAS 2050 base unit
11402
1 x FAS 2050 base unit
plus 1 x extension shelf
19003
plus 2 x extension shelf
26604
plus 3 x extension shelf
34205
plus 4 x extension shelf
41806
plus 5 x extension shelf
49407
plus 6 x extension shelf
57008
1 x extension shelf
7601
If a base unit plus a disk shelf expansion unit is ordered,
the technical specifications given below simply add.
The disk array may be expanded by two additional Gigabit
Ethernet ports—Dual Port GbE PCI-e board (available only
on a project base).
www.boschsecurity.com 
 Bosch Security Systems B.V.
9