Intellinet 560665 Benutzerhandbuch

 

  

Save Installation Time and Money with PoE

The Intellinet Network Solutions 8-Port PoE Web-Smart Switch (560665) is designed to pass both
data and electrical power to a number of PoE compatible devices via standard Cat5e or Cat6
network cables. Equipped with eight Fast Ethernet ports (all of which support 802.3at/af
PoE/PoE+), this switch and can power wireless LAN access points and bridges, VoIP phones, IP
video cameras and more while delivering network speeds of up to 100 Mbps.

The Intellinet PoE Web-Smart Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 Watts of power per port*.
IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense
of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and
walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function,
your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we
suggest use of an Intellinet PoE/PoE+ Splitter.

This PoE switch is equipped with an impressive array of advanced management functions that allow you to be in full control over your
network. The 8-Port PoE Web-Smart Desktop Switch supports VLAN, port aggregation, QoS and port mirroring - just to name a few.

* Total PoE budget for this switch is 130 watts. Per-port average power distribution is 15 Watts; maximum per-port power usage cannot

exceed 30 Watts.

Features:

Provides power and data connection for up to eight PoE network devices
Save time and money by delivering data and power via existing network cables
10/100 auto-sensing ports automatically detect optimal network speeds
IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
Power output up to 30 Watts per port*
Total power budget of 130 Watts
Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP
phones, IP cameras)
Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
All RJ45 ports with Auto-MDIX (auto uplink) support
Web-based configuration
Supports VLAN (tag-based and port-based)
Supports link aggregation (trunking)
Supports port mirroring
Supports two types of QoS: 802.1p and DSCP
Supports bandwidth control per port
Broadcast storm control with multicast packet rate settings
Store and forward switching architecture
Supports Rapid Spanning Tree/Spanning Tree protocol
IEEE 802.3x flow control for full duplex
Supports up to 4096 MAC address entries