ZyXEL MC1000-SFP Media Converter 91-010-072001 Merkblatt
Produktcode
91-010-072001
■
Conversion between different
transmission speeds and
media types
transmission speeds and
media types
■
Standalone and compact
hardware design
hardware design
■
Auto-negotiating Ethernet
port (Speed and Half/Full
Duplex)
port (Speed and Half/Full
Duplex)
■
Auto-crossover Ethernet port
(Supports Auto MDI/MDI-X)
(Supports Auto MDI/MDI-X)
■
Standard open Fiber slots for
SFP Transceiver
SFP Transceiver
■
Built-in Link Loss Forwarding
Technology
Technology
■
LED Status Display
Media Converter
mc1000-
sfp
sfp
The MC1000-SFP is an Ethernet media converter that converts media
transmission between UTP Copper cablings and fiber SFP (Small Form-Factor
Pluggable) Transceivers. The MC1000-SFP copper-to-fiber module is available in
10/100Mbps Fast Ethernet and 1000 Mbps Gigabit Ethernet types, allowing
seamless integration between Fast/Gigabit Ethernet networks using unshielded
twisted pair (UTP) copper cabling, and Gigabit fiber networks.
transmission between UTP Copper cablings and fiber SFP (Small Form-Factor
Pluggable) Transceivers. The MC1000-SFP copper-to-fiber module is available in
10/100Mbps Fast Ethernet and 1000 Mbps Gigabit Ethernet types, allowing
seamless integration between Fast/Gigabit Ethernet networks using unshielded
twisted pair (UTP) copper cabling, and Gigabit fiber networks.
Long-haul Gigabit Ethernet
Depending on the distance between two sites, users can select and insert proper SFP Transceivers into
the slots for different network environments: multi-mode SFP for short distance (up to 550m) or single-
mode SFP for long distance (from 10km to 40km or 70km maximum). Regardless of the scale of
deployment, the MC1000-SFP is the most cost-effective, flexible solution for mixed copper/fiber
environments like LANs, campus networks or even Metropolitan Area Networks.
Easy Installation
The Auto-negotiating Ethernet function empowers the Gigabit RJ-45 port on MC1000-SFP to negotiate
transmission speed and mode with peer devices automatically; and the Auto-crossover Ethernet port
can prevent circuit mismatch problems by auto-sensing MDI/MDIX configuration. With these intelligent
functions, MC1000-SFP can be paired with a switch, a NIC (Network Interface Card) or a Gigabit Ethernet
device via a UTP/STP cable easily.
Easy Troubleshooting
With the Link Loss Forwarding mechanism activated, any detected broken link on the RJ-45 Ethernet
port will force the fiber port to take over, and the fiber uplink port will stop transmitting then “turned
off” as soon as the remote link is down. Transparent link status will be delivered by the Link Loss
Forwarding mechanism to facilitate the troubleshooting process.
Benefits
The most cost-effective, flexible solution
for mixed copper/fiber environments
for mixed copper/fiber environments