Moxa AWK-6222-EU-T Merkblatt

Seite von 2
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Industrial Wireless IEEE 802.11 Solutions
AWK-6222 Series
Industrial IEEE 802.11a/b/g IP68 dual-radio wireless AP/bridge/client
The AWK-6222 outdoor wireless AP/bridge/client avoids interruptions 
in WLAN transmissions with its dual 2.4/5 GHz RF modules, which 
allow two independent wireless connections over different frequencies. 
To maximize wireless and wired network availability, the AWK-
6222 can incorporate Ethernet redundancy using RSTP, and power 
redundancy using dual DC power inputs and PoE. In addition, the 
AWK-6222 is housed in an IP68 metal casing with M12 connectors for 
total protection against dust, water, vibration, and other environmental 
effects. This rugged unit supports seamless roaming to achieve ultra-
reliable and redundant wireless networks under challenging outdoor, 
mobile conditions. These industrially hardened features let you set up 
a rock-solid WLAN to ensure that your entire network will always be in 
service.
The AWK-6222 is compliant with the essential sections of EN 50155, 
covering operating temperature, power input voltage, surge, ESD and 
vibration.
Redundancy to Increase System Reliability
•  PoE and dual DC power inputs
•  Dual-radio design with 2.4 and/or 5 GHz dual-band operation for 
redundant WLAN connections
•  Redundant roaming for fast and stable handoff
•  Ethernet redundancy via RSTP
Industrial and Outdoor Rated Features for Critical 
Environments
•  IP68-rated metal housing and -40 to 75°C wide operating 
temperature
•  Long-distance wireless transmission over 10 km
•  Anti-vibration M12 design and waterproof/dust-tight RJ45 
connectors
•  Wall, DIN rail, and pole mounting options for versatile outdoor 
installation
 
IEEE 802.11a/b/g compliant
 
Dual-radio design: 2.4 GHz and/or 5 GHz RF bands
 
Supports 100 ms redundant roaming
 
Compliant with essential sections of EN 50155
 
Rugged IP68-rated housing and -40 to 75°C operating 
temperature
WLAN Interface
Standards: 
IEEE 802.11a/b/g for Wireless LAN 
IEEE 802.11i for Wireless Security 
IEEE 802.3 for 10BaseT(X) 
IEEE 802.3u for 100BaseT(X) 
IEEE 802.3af for Power-over-Ethernet 
IEEE 802.1D for Spanning Tree Protocol 
IEEE 802.1w for Rapid STP 
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical):  
• DSSS with DBPSK, DQPSK, CCK 
• OFDM with BPSK, QPSK, 16QAM, 64QAM 
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,  
DBPSK @ 11 Mbps 
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,  
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (central frequency): 
US:  
2.412 to 2.462 GHz (11 channels) 
5.18 to 5.24 GHz (4 channels)  
EU:  
2.412 to 2.472 GHz (13 channels) 
5.18 to 5.24 GHz (4 channels) 
JP: 
2.412 to 2.472 GHz (13 channels, OFDM) 
2.412 to 2.484 GHz (14 channels, DSSS) 
5.18 to 5.24 GHz (4 channels for W52)
Security:  
• SSID broadcast enable/disable 
• Firewall for MAC/IP/Protocol/Port-based filtering 
• 64-bit and 128-bit WEP encryption, WPA/WPA2 Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:  
802.11b: 1, 2, 5.5, 11 Mbps 
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power:    
802.11b: 
Typ. 23±1.5 dBm @ 1 to 11 Mbps 
Dual RF
Wireless Redundancy
Dual RF
Wireless Redundancy
Introduction
Specifications