Star Micronics SM-T301I-DB50 39631910 Benutzerhandbuch

- 16 -

1

  Pressing and holding the POWER button for 3 seconds or more will turn the power on or off.

2

  Pressing both the POWER and FEED buttons simultaneously will cause the ERROR lamp to 

flash 5 times and put the printer into Memory Switch Setting mode. The POWER button can 
now be used to change Printer MODE status visible on the LCD screen for fast configuration.

 

(Refer to 2.4 Memory Switch Settings for details about mode conversion)

When the printer is on, paper can be fed manually by pressing and holding the-
FEED button for more than one second.

1) POWER (Green) :  Printer is ON and ready to receive data.
2) ERROR (Red) : 

Indicates an error has occurred. (Ex: Paper Out, Cover Open, etc)

LCD will display most of the printer status.

1)  The 128 × 32 dot display shows alphanumeric characters.

2) Content

Mode/Status : Indicates the currently specified printer mode or error status.

Data communication status : 

... The image shown on the left indicates that the data 

communication status is good.

Remaining battery power : 

... There is sufficient remaining battery power.

 

... The remaining battery power is low. Please charge 

the battery pack. (*)

                                                       

Flashing

 ... The remaining battery power is extremely low.

 

 Stop using the printer immediately, and charge the 

battery pack. (*)

Bluetooth connection status : 

... The mark on the left indicates that there is a Blue-

tooth connection.

                           

  When there is no Bluetooth connection, the mark is 

not displayed.

POWER

  

ERROR

Bluetooth Mode

Mode Status

Remaining battery power

Data Communication Status

  Bluetooth Connection Status          

  FEED Button          

POWER Button          

  ERROR Lamp

 POWER Lamp          

LCD