LevelOne 4 x 802.3af PoE + 4 FE Unmanaged Switch -40 ~ 75C, DIN-rail IES-0821-v1 Merkblatt

Produktcode

IES-0821-v1

Overview

LevelOne IES-0821 Industry Ethernet Switch provides 4 PoE ports of

10/100Base-TX plus 4 ports of 10/100Base-TX Ethernet to enable high

speed network at mission-critical environment. This device is designed

to be mounted on an industry standard DIN-rail, plus the clearly visible

status LEDs provide simple monitoring of port link activity.

High Reliability

All components are built to withstand harsh environment applications

without compromise where humidity, temperature variation and even

shock vibration are concerns, including Electric & Utility, Critical

Infrastructure, Transportation and Surveillance Security. This device

operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.

Features

- Provides flexibility of 8 Ethernet ports that configure in combinations

of copper and fiber optic interfaces

- -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @

-40°C to 85°C (-40°F to 185°F)

- Port1 - 4 support IEEE802.3af Power over Ethernet (PoE) Power

Sourcing Equipment (PSE)

- Provides DIN-rai, panel, or rack mounting

- Alarms for power and port link failure by relay output

- Redundant power inputs with Terminal Block and DC Jack

- Complies with IEC61000-6-2 EMC Generic standard immunity for

Industrial environment

- Complies with NEMA TS2 Environmental requirements for Traffic

control equipment

- 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX

Redundancy

This redundant power system is designed to meet the challenge of

power failure to ensure reliability and constant availability. Single power

design works fine in non-critical network applications, but it falls short

drastically for network applications in transportation, automate

production or banking.

Plug & Play

This unmanaged Industrial Ethernet Switch is designed for the

demanding industrial environments at businesses in need of instant

connectivity with no setup or configure required, truly plug and play.

Power over Ethernet

This switch is Power Sourcing Equipment (PSE), and it is fully complied

with IEEE 802.3af PoE standard at maximum 15.4W power budget per

port. It helps to save infrastructure wiring costs dramatically by

eliminating electric wiring and less UPS needed.

Safety

This device has been tested under UL508 standard for Industrial Control

Equipment to endurance under test turn on and off 6,000 times while

loaded, with no single failure. Plus, it is the E-Mark complied to ensure

reliability at rolling stock applications. It’s highly reliability and safety

measurement to ensure field hardened, especially for the harsh

environment.

IES-0821

Diagrams

4 x 802.3af + 4 FE Unmanaged Switch

-40 to 75C, DIN-rail

Unit: mm

Side

Buttom

Top

Back

Front