LevelOne 4 FE PoE + 1 FE SMF SC Industrial Switch, 30km IFE-0502-v2 Benutzerhandbuch
Produktcode
IFE-0502-v2
2
4 FE PoE + 1 FE
Single-mode SC
Industrial Switch (30km)
IFE-0502
H/W Version: 1
The LevelOne IFE-0502 4-Port 10/100TX PoE and 1-port
100Base SC Industrial Fast Ethernet Switch combines
PoE capability and 4-port switching into a small heavy-
duty metal casing for Industrial PoE applications.
The IEEE802.3af Power over Ethernet compliant switch
connects to a 48V DC power source to provide power
and 10/100Mbps data transmission over Ethernet
cabling to attached devices.
Industrial PoE Application
The IFE-0502 Industrial PoE Switch is designed for
network devices operating in harsh environments.
The ports and PoE injector are enclosed in a robust
and durable metal casing. The switch is easily installed
at network edges where AC power is not always
available. In addition, the 48V AC-DC Power Supply
Package* can be equipped with IFE-0500 at the place
where lacking of DC power support; this package can
allow the AC power source be transformed into DC
48V power and work with terminal block DC input on
IFE-0502.
The switch is built to operate between -10°C to 60°
C in 95% non-condensing humidity and is suitable
for covered outdoor installation. Mounting options
include wall-mounting, DIN-rail mounting and stand-
alone panel mounting.
Extending the Network
The 1-Port SC Fiber port links the IFE-0502 to a
network to provide network extendibility to network
edges where few AC power outlets are located. The
fiber port supports Single-Mode and can be connect
to a network 30km away. The port support Auto
MDI/MDI-X and the switch uses standard Store-
and-Forward switching architecture with a 1Gbps
backplane and 1K MAC address table.
Auto-Sensing Connected PD Devices
The IFE-0502 features auto-sensing for providing
power to IEEE 802.3af PoE compliant attached PD
devices. This ensures that non-PoE devices are not
damaged by unnecessary power when connected.
The IFE-0502 also supports over-current protection,
under-current detection and fault protection.
*Power supply package is not included
Key Features
- Industrial PoE Switch for harsh network applications
- 4-port 10/100TX with embedded PoE injector
- 1-port Single-Mode SC Fiber Connector for
connecting to LAN via Fiber Optic cable
- Over-current protection
- Features Auto-sensing for detecting PoE or non-PoE
devices
- Rigid metal casing for covered outdoor application
- DIN-Rail, wall-mounting and stand-alone installation
Related Products
1. 100Base Single-Mode SC
Fiber Connector
2. Fast Ethernet PoE RJ-45 Ports
3. DIN-Rail
4. Terminal Block DC Input
IFE-0500
4 FE PoE + 1 FE Industrial Switch
IFE-0501
4 FE PoE + 1 FE Multi-Mode SC
Industrial Switch (2km)
1
2
3
4