LevelOne 300Mbps Wireless Access Point WAP-6013-v1 Benutzerhandbuch
Produktcode
WAP-6013-v1
3
Wireless Bridges/Access Points
www.level1.com
I
one world_one brand_one level_
Technical Specification
Standard Compliant
IEEE 802.3, IEEE 802.3u
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b,
IEEE 802.11i, IEEE 802.11e, IEEE 802.1x, IEEE 802.3x,
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b,
IEEE 802.11i, IEEE 802.11e, IEEE 802.1x, IEEE 802.3x,
Hardware Specification
LAN-Interface
5x 10/100 Mbps Auto-MDIX RJ-45 Port
Antennas
2x 2dBi fix dipole antenna (5dbi option available)
Radio
Wireless Data Transfer Rate
802.11n: 150 ~ 78 Mbps
802.11g: 54 ~ 6 Mbps
802.11b: 11 ~ 1 Mbps
802.11g: 54 ~ 6 Mbps
802.11b: 11 ~ 1 Mbps
Number of Channels
Ch.1 ~ 11 USA
Ch.1 ~ 13 EU
Ch.1 ~ 13 EU
Operating Frequency
2.4 ~ 2.4835 GHz
Software Specification
Wireless Features
Wireless Signal On Button Support
Master/Guest SSID separation
Auto Channel Selection
Master/Guest SSID separation
Auto Channel Selection
Wireless Security
WEP 64/128-bit Web share key encryption
WPA, WPA2, 802.1x RADIUS support
128-bit TKIP/AES encryption
SSID Broadcast On/Off
WiFi Protect Setup (WPS) Push Button / WebUI
WPS setup with PBC/PIN Support
WPA, WPA2, 802.1x RADIUS support
128-bit TKIP/AES encryption
SSID Broadcast On/Off
WiFi Protect Setup (WPS) Push Button / WebUI
WPS setup with PBC/PIN Support
Operation modes
AP mode
The AP will act as a central hotspot allows wireless devices to
connect to wireless network
Client mode
Act as a wireless card to connect with remote AP/router
WDS Bridge
Connect to your local LAN with remote LAN wirelessly
Support 2 kinds of connect methods:
Point to point
Point to multi-points (Max: 2 peer APs)
Universal Repeater
It can extend the wireless signal of remote AP/router. It works
as AP and wireless client Simultaneously
WDS repeater
It can extend the wireless signal of remote AP/router
which have WDS function. It works as AP and WDS Bridge
simultaneously
The AP will act as a central hotspot allows wireless devices to
connect to wireless network
Client mode
Act as a wireless card to connect with remote AP/router
WDS Bridge
Connect to your local LAN with remote LAN wirelessly
Support 2 kinds of connect methods:
Point to point
Point to multi-points (Max: 2 peer APs)
Universal Repeater
It can extend the wireless signal of remote AP/router. It works
as AP and wireless client Simultaneously
WDS repeater
It can extend the wireless signal of remote AP/router
which have WDS function. It works as AP and WDS Bridge
simultaneously
QoS Support
802.11e WMM Supported
Management
Quick Installation Wizard
Web-Based GUI Configuration
Syslog monitoring
SNMP V1/V2c supported
Web-Based GUI Configuration
Syslog monitoring
SNMP V1/V2c supported
Firmware Upgrade
Web-based (HTTP)
Supported Operating Systems
Windows 2000/XP/Vista/7
Physical Specification
Power Adapter
DC5V / 1A
Dimensions: (L x W x H)
185mm x 119mm x 32mm
Certifications
CE, FCC
Environment Specification
Operating Temperature
Temperature: 0°C ~ 40°C, Humidity: 10~85% non-condensing
Storage Temperature
Temperature: -20°C ~ 70°C, Humidity: 0~95% non-condensing