Cisco PIX 515/515E Restricted Platform License memory upgrade from 32 to 64 MB PIX-515-MEM-32= Benutzerhandbuch

Produktcode
PIX-515-MEM-32=
Seite von 3
 
 
 
 
All contents are Copyright © 1992–2005 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement. 
Page 1 of 2 
 
 
 
PRODUCT BULLETIN NO. 2768 
CISCO PIX 515/515E SECURITY APPLIANCE MEMORY UPGRADE 
TO SUPPORT SECURITY APPLIANCE SOFTWARE VERSION 7.0 
PRODUCT OVERVIEW 
Cisco PIX
®
 Security Appliance Software Version 7.0 delivers several new security features for small to medium-sized business and enterprise 
networks. This release enables customers to: 
 
Fortify business networks with advanced application inspection 
 
Expand policy control with the Cisco
®
 Modular Policy Framework 
 
Reduce operational costs with virtual firewalls 
 
Simplify deployment with transparent firewall 
 
Extend networks with full-featured, resilient IP Security (IPSec) VPNs 
 
Maximize uptime with Active-Active high availability 
 
Secure 3G Mobile Wireless with GPRS Tunneling Protocol (GTP) inspection services 
 
Customers using Cisco PIX 515 and 515E Security Appliances can take advantage of these benefits by deploying Cisco PIX Security Appliance 
Software Version 7.0 and the appropriate feature licenses. Before installing this new release, the memory on Cisco PIX 515 and 515E Security 
Appliances must be upgraded. A memory upgrade is not required for Cisco PIX 525 and 535 Security Appliances. 
Customers with a Cisco SMARTnet
®
 support contract can obtain Cisco PIX Security Appliance Software Version 7.0 at no additional charge 
from the Cisco.com Software Center. Memory upgrades are not covered by Cisco SMARTnet contracts. 
UPGRADE PATHS 
To run Cisco PIX Security Appliance Software Version 7.0 or later on Cisco PIX 515 and 515E Security Appliances with a restricted platform 
license and 32 MB of memory, devices must be upgraded to a total of 64 MB memory. Devices with an unrestricted or failover license and 64 MB 
of memory must be upgraded to a total of 128 MB of memory. Cisco PIX 515 and 515E Security Appliances that are already operating at these 
higher memory levels do not need a memory upgrade. Table 1 lists memory upgrade kits that can be ordered to achieve these higher memory levels. 
Table 1.  Memory Upgrade Options Based on Platform Licenses 
Current Appliance Configuration 
Upgrade Solution 
Platform License 
Total Memory (Before Upgrade) 
Part Number 
Total Memory (After Upgrade) 
Restricted 
32 MB 
PIX-515-MEM-32= 
64 MB 
Unrestricted 
64 MB 
PIX-515-MEM-128= 
128 MB 
Failover 
64 MB 
PIX-515-MEM-128= 
128 MB 
AVAILABILITY 
The upgrade memory kits will be orderable on March 10, 2005.