Tandberg Data SCSI DLT-V4 Internal Grey 7301708800 Benutzerhandbuch

Chapter 2  Installing the Tape Drive

Installing the Internal SCSI Tape Drive

DLT-V4 Product Manual

17

2

If the tape drive is the only SCSI device attached to the selected server 

other than the SCSI host adapter, or if it is the last physical device on the 

SCSI bus (at the end of the SCSI chain), you must terminate it. If another 

SCSI device is the last device on the SCSI bus, confirm that it is properly 

terminated and do not terminate the tape drive.

To terminate the tape drive, install an active LVD/SE cable-end or inline 

terminator on the SCSI cable you intend to use with the tape drive, as 

shown in 

. You can use a cable-end terminator or an inline 

terminator, whichever is most convenient. See the terminator’s 

instructions for more information.

a. Factory default SCSI ID

Regardless of which device terminates the SCSI bus, that 

device must have power applied and be powered on for 

proper termination to occur.