Lancom Systems 1781EF 62602 Benutzerhandbuch
Produktcode
62602
Routing functions
Policy-based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to particular remote
sites or lines
sites or lines
Policy-based routing
Propagating routes; separate settings for LAN and WAN. Extended RIPv2 including HopCount, Poisoned Reverse, Triggered Update for LAN (acc.
to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options for propagation of routes. Definition of RIP sources with wildcards
to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options for propagation of routes. Definition of RIP sources with wildcards
Dynamic routing
Layer 2 functions
VLAN ID definable per interface and routing context (4,094 IDs) IEEE 802.1Q
VLAN
Packets sent in response to LCOS service requests (SSH) via Ethernet can be routed directly to the requesting station (default) or to a target determined
by ARP lookup
by ARP lookup
ARP lookup
LAN protocols
ARP, Proxy ARP, IP, ICMP, PPPoE (Server), RIP-2 (Propagation), TCP, UDP
IP
WAN protocols
PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-2, VLAN
ADSL, Ethernet
WAN operating mode
ADSL1, ADSL2 or ADSL2+ with external ADSL2+ modem
xDSL (ext. modem)
Interfaces
10/100/1000 Mbps Gigabit Ethernet
WAN: Ethernet
4 individual 10/100/1000 Mbps Ethernet ports; up to 3 ports can be operated as additional WAN ports with load balancing. Ethernet ports can be
electrically disabled within LCOS configuration. The ports support energy saving according to IEEE 802.3az
electrically disabled within LCOS configuration. The ports support energy saving according to IEEE 802.3az
Ethernet ports
Slot for Small Form-factor Pluggable Gigabit Ethernet transceivers ('mini-GBIC'). Compatible to optional LANCOM SFP modules for fiber connections
over short distances (SX) or long distances (LX). By default an additional LAN port that can be configured as a WAN port
over short distances (SX) or long distances (LX). By default an additional LAN port that can be configured as a WAN port
SFP slot
Each Ethernet port can be freely configured (LAN, DMZ, WAN, monitor port, off). LAN ports can be operated as a switch or separately. Additionally,
external DSL modems or termination routers can be operated as a WAN port with load balancing and policy-based routing. DMZ ports can be
operated with their own IP address range without NAT
external DSL modems or termination routers can be operated as a WAN port with load balancing and policy-based routing. DMZ ports can be
operated with their own IP address range without NAT
Port configuration
Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud
Serial interface
Management
Syslog buffer in the RAM (size depending on device memory) to store events for diagnosis. Default set of rules for the event protocol in Syslog. The
rules can be modified by the administrator. Display and saving of internal Syslog buffer (events) from LANCOM devices.
rules can be modified by the administrator. Display and saving of internal Syslog buffer (events) from LANCOM devices.
Device Syslog
Remote configuration with SSH in software
Remote maintenance
SSH-client function (in software) compatible to Open SSH under Linux and Unix operating systems for accessing third-party components from a
LANCOM router. Also usable when working with SSH to login to the LANCOM device. Support for certificate- and password-based authentication.
SSH client functions are restricted to administrators with appropriate rights.
LANCOM router. Also usable when working with SSH to login to the LANCOM device. Support for certificate- and password-based authentication.
SSH client functions are restricted to administrators with appropriate rights.
SSH & Telnet client
Access rights (read/write) over WAN or LAN can be set up separately (SSH), access control list
Security
Scripting function for batch-programming of all command-line parameters and for transferring (partial) configurations, irrespective of software
versions and device types, incl. test mode for parameter changes. Utilization of timed control (CRON) or connection establishment and termination
to run scripts for automation.
versions and device types, incl. test mode for parameter changes. Utilization of timed control (CRON) or connection establishment and termination
to run scripts for automation.
Scripting
Scheduled control of parameters and actions with CRON service
Timed control
Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, internal logging buffer for firewall events, monitor mode for
Ethernet ports
Ethernet ports
Diagnosis
Statistics
Extensive Ethernet and IP statistics
Statistics
Connection time, online time, transfer volumes per station. Snapshot function for regular read-out of values at the end of a billing period. Timed
(CRON) command to reset all counters at once
(CRON) command to reset all counters at once
Accounting
Hardware
12 V DC, external power adapter (230 V) with bayonet cap to protect against accidentally unplugging
Power supply
Temperature range 5–40° C; humidity 0–95%; non-condensing
Environment
Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; 210 x 45 x 140 mm (W x H x D)
Housing
None; fanless design without rotating parts, high MTBF
Fans
LANCOM 1781EF (CC)
Features as of: LCOS 8.70 CC