Philips HTL7180 HTL7180/F7 Benutzerhandbuch

8

EN

3  Connect and set 

up

This section helps you connect your SoundBar 

to a TV and other devices, and then set it up. 

For information about the basic connections of 

your SoundBar and accessories, see the quick 

start guide. 

Note

 

•

For identification and supply ratings, see the type plate 

at the back or bottom of the product.

 

•

Before you make or change any connections, make sure 

that all devices are disconnected from the power outlet.

Charge speakers

If the wireless surround speaker is undocked 

from the main unit, its battery level is indicated 

by the indicator on the speaker.

•  Light up white: full battery

•  Light up red: low battery level (less than 

30% remaining)

•  Flash red: near empty (less than 10% 

remaining)

  

1 

Dock your speakers onto the main unit to 

charge the speakers.

2 

Turn on the main unit.

 

»

During charging, the indicator on the 

speaker lights up amber.

 

»

When fully charged, the indicator on 

the speaker lights up white for 30 

seconds.

Note

 

•

It may take around 2 hours to fully charge the speakers.

 

•

If the charging lasts more than 4 hours during standby 

of the main unit, the speakers automatically switch to 

standby.

Pair up with speakers/

subwoofer

The wireless speakers and subwoofer 

automatically pair up with the SoundBar for 

wireless connection when you turn on the 

SoundBar, the speakers and the subwoofer. 

If no audio from the wireless speakers and 

subwoofer can be heard, manually pair up the 

speakers and the subwoofer.

Pair up with the speakers

1 

Turn on the SoundBar and the surround 

speaker.

 

»

If the connection to the SoundBar is 

lost, the indicator on the speaker blinks 

red slowly.

2 

Press the Connection key on the speaker 

with a pin to enter the pairing mode.

 

»

 The indicator on the speaker blinks 

red quickly.

3 

On the remote control, press AUX, and 

then press TREBLE -, BASS + and + 

(Volume) within three seconds.

 

»

If the pairing succeeds, the indicator on 

the speaker lights up white (undocked 

from the main unit), or the indicator 

on the speaker lights up white for 30 

seconds (being docked into the main 

unit).

 

»

If the pairing fails, the indicator on the 

speaker blinks red slowly.

4 

If the pairing fails, repeat the steps above.

HTL7180_F7_UM_V1.1.indb   8

2013/5/14   14:50:00