Cisco Aironet Power Injector Media Converter AIR-PWRINJ-FIB= Benutzerhandbuch

MT-RJ cable assemblies that contain alignment pins (small metal pins in the connector) are not
compatible with the Cisco media converter and will not mate correctly.

The MT-RJ connector is a small form factor connector that contains two fibers in one small polymer
ferrule. When connecting to the power injector media converter you need to use a non-pinned MT-RJ
cable assembly.

The illustration showing how to secure the pigtail to the power injector on page 24 of the Quick Start
Guide Cisco Aironet Power Injector and Aironet Power Injector Media Converter is incorrect.

shows the correct way to route the pigtail wires.

This section lists caveats for the Cisco Aironet Power Injector Media Converter (AIR-PWRINJ-FIB).

The following caveats have not been resolved.

CSCea81288—Catalyst 2900 switch Fiber Link LED does not indicate correct status of the link.

The fiber link LED on a Catalyst 2900 switch is green even when the link is down.

There is no workaround for this caveat.

95519