Cisco Memory 128MB DIMM DRAM for Cisco2600XM MEM2600XM-128D= Benutzerhandbuch
Produktcode
MEM2600XM-128D=
3
Upgrading System Memory, Internal Flash Memory, and Boot ROM in Cisco 2600 Series Routers
OL-5474-01
Accessing the System Board
Step 4
Remove the screws located on the top of the chassis. Note that the chassis is composed of two sections:
top and bottom.
top and bottom.
Step 5
Holding the chassis with both hands, position it as shown in
.
Step 6
Slide the top section away from the bottom section as shown in
.
Figure 1
Holding Chassis for Cover Removal
Figure 2
Removing Chassis Cover
Removing the Chassis Cover on Cisco 2691
T o remove the chassis cover:
Step 1
Power off the router and unplug the AC power cord.
Step 2
Disconnect all network interface cables from the rear panel.
Warning
Before opening the unit, disconnect the telephone-network cables to avoid contact with
telephone-network voltages. Statement 1041
telephone-network voltages. Statement 1041
Step 3
Attach an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the
equipment end of the wrist strap to the metal back plate of the chassis.
equipment end of the wrist strap to the metal back plate of the chassis.
Step 4
Place the router on a flat surface. Remove the five screws located on top of the cover.
POWER
RPS
ACTIVITY
H11658
Cisco 2600
SERIES
35392
POWER
RPS
ACTIVITY
Cisco 2600
SERIES