Enterasys Platinum Distributed Forwarding Engine 7H4382-25 Benutzerhandbuch
Produktcode
7H4382-25
Matrix DFE Series Module Installation Guide B-1
B
Mode Switch Bank Settings
and Optional Installations
This appendix covers the following items:
•
•
•
Required Tools
Use the following tools to perform the procedures provided in this appendix:
•
Antistatic wrist strap
•
Phillips screwdriver
Setting the Mode Switches
shows the location of the mode switches and the switch settings for normal
operation. These switches are set at the factory to the off position and rarely need to be
changed.
changed.
Switch definitions and positions are as follows:
•
Switches 1 through 6 – For Enterasys Networks use only.
Caution: An antistatic wrist strap is required to perform the procedures in this appendix.
Use the antistatic wrist strap when performing any of the procedures in this appendix to
minimize ESD damage to the devices involved.
Use the antistatic wrist strap when performing any of the procedures in this appendix to
minimize ESD damage to the devices involved.
Caution: Read the appropriate sections to be fully aware of the consequences when
changing switch settings.
changing switch settings.
Only qualified personnel should change switch settings.